{"id":2636,"date":"2022-07-12T05:44:53","date_gmt":"2022-07-12T05:44:53","guid":{"rendered":"https:\/\/livingscented.com\/?p=2636"},"modified":"2022-06-22T03:53:59","modified_gmt":"2022-06-22T03:53:59","slug":"how-to-inflate-a-sleep-number-bed-without-the-remote","status":"publish","type":"post","link":"https:\/\/livingscented.com\/how-to-inflate-a-sleep-number-bed-without-the-remote\/","title":{"rendered":"How To Inflate A Sleep Number Bed Without The Remote"},"content":{"rendered":"\n
Do you have a Sleep Number bed, but can’t seem to find the remote? Don’t worry, you can still inflate your bed without the remote. All you need is a little patience and some elbow grease.
Here’s how to do it:\n\n First, locate the inflation valves on your mattress. There should be two of them, one on each side of the bed.\n\n
Next, use an air pump to inflate the mattress. You can find an air pump at most hardware stores.\n\n Attach the air pump to one of the inflation valves and turn it on.
The mattress will start to fill up with air.\n\n Once the mattress is inflated, turn off the air pump and remove it from the valve.\n\n Repeat the process with the other inflation valve.\n\n
Now that your mattress is inflated, you can enjoy a good night’s sleep. Just don’t forget to find that remote! <\/p>\n \n
<\/p>\n \n
Assuming you have a Sleep Number bed without the remote (which typically controls the inflation\/deflation of the bed), there are a few ways you can still air up the bed. \n\n The first way is to locate the air pump that is typically located underneath the bed. There should be a cord attached to the pump with a plug that goes into an outlet.
Once the pump is plugged in, turn it on and it will start inflating the bed. \n\n The second way is to use a manual air pump. These can be purchased online or at a store that sells Sleep Number beds.
To use this pump, simply attach the hose to the inflation valve on the side of the bed and start pumping. \n\n The last way, which is typically the most difficult, is to blow up the bed with your mouth. This can be done by taking a deep breath and blowing into the inflation valve.
It will take quite a bit of time and effort to fully inflate the bed this way, so it is not recommended unless you have no other option. <\/p>\n \n
Yes, you can manually adjust your Sleep Number bed. To do so, first identify which model bed you have. There are three different models: the Classic series, the Performance series, and the Innovation series.
Each model has a different way of adjusting.\n\n For the Classic series, there are two ways to adjust the bed. One is by using the air pump that came with the bed.
The other is by manually adjusting the air chambers using the knob at the head of the bed.\n\n For the Performance series, there are three ways to adjust the bed. One is by using the air pump that came with the bed.
The second is by using the wireless remote control. The third is by manually adjusting the air chambers using the knob at the head of the bed.\n\n For the Innovation series, there is only one way to adjust the bed and that is by using the wireless remote control.\n\n
Once you know which model bed you have, you can then adjust the bed to your desired firmness. For the Classic and Performance series, you will use the air pump to inflate or deflate the air chambers. <\/p>\n \n
Assuming you have a Sleep Number bed that is not inflating: \n\n There are a few things you can check to see why your Sleep Number bed is not inflating: \n\n 1. Check to see if the air pump is properly plugged in to an outlet and that the cord is not damaged. \n
2. Check to see if there is power going to the air pump by checking the circuit breaker or fuse box. \n 3. If the air pump has power, check to see if there is an air leak in the tubing. If there is an air leak, the bed will not be able to hold air.
You can check for an air leak by feel or by using a soapy water solution. \n 4. If there are no air leaks, check to see if the air pump is working properly. You can do this by feeling the air pump for vibration and by listening for a sound. \n
5. If the air pump is not working, you may need to replace it. \n\n If you have followed all of these steps and your Sleep Number bed still will not inflate, you may need to contact Sleep Number customer service for further assistance. <\/p>\n \n
There is not a universal remote for Sleep Number beds. Each Sleep Number bed has its own remote, which is used to adjust the firmness of the bed. The Sleep Number bed remote is not compatible with any other type of bed or remote.
If you lose your Sleep Number bed remote, you can purchase a replacement remote from the Sleep Number website. <\/p>\n \n