Outdoor chair cushions get a lot of wear and tear from the elements and from sitting on them, so they often need to be reupholstered. You can do this yourself with some basic tools and materials. First, remove the old fabric from the cushion, being careful not to rip or damage the foam inside.
Then, measure and cut new fabric to fit the cushion, allowing for about an inch of extra fabric all around. Pin or staple the new fabric in place, then start sewing it on using a curved needle and upholstery thread. Start at the center of one side and work your way around, making sure to pull the fabric taut as you go.
When you reach the end, knot off the thread and trim any excess fabric.<\/p>\n \n
Most people don’t think about how to care for their sun lounger cushions until they start to show signs of wear and tear. Here are some tips on how to keep your sun lounger cushions looking like new:\n\n1. Store them indoors when not in use.
This will protect them from the elements and extend their life.\n\n2. Clean them regularly with soap and water. This will remove any dirt or debris that could cause staining.\n\n
3. Use a mild detergent if needed for stubborn stains. Be sure to rinse the cushion thoroughly afterwards so that no residue is left behind.\n\n4. Let the cushion dry completely before using it again or storing it away.
Moisture can lead to mold and mildew growth, which can ruin the fabric over time.<\/p>\n \n
Outdoor cushions can take a beating from the elements. Sun, rain, and wind can quickly fade and damage them, leaving you with stained, frayed, and otherwise ruined cushions. But don’t despair!
There is hope for your outdoor cushions, and you don’t need to sew a single stitch to recover them. Here’s how:\n\n1. First, gather your supplies.
You’ll need a staple gun and staples, fabric scissors, upholstery tacks (optional), and of course, new fabric. Choose a fabric that is durable and weather-resistant. Outdoor fabrics are ideal, but you can also use indoor upholstery fabrics as long as they’re treated with a water repellant or waterproofing spray first.\n\n
2. Cut your fabric to size. Make sure to allow for extra fabric around the edges so that you can wrap it around the back of the cushion and staple it in place.\n\n3. If your cushion has ties or buttons, remove them now.
You’ll be reattaching them later.\n\n4. Wrap the new fabric around the front of the cushion and begin stapling it in place on the back side of the cushion using your staple gun . Start in the middle of one side and work your way out toward the corners .
Be sure to pull the fabric tight as you go so that there are no wrinkles or sags when you’re finished .\n5 If you’re using tacks , now is the time to add them around the edge of the recovered cushion for extra durability . Attach them about every 4 inches .
6 Once all sides are secure , reattach any buttons or ties , if desired . And voila ! You’ve successfully recovered an outdoor cushion without sewing a single stitch !<\/p>\n \n
If your outdoor furniture cushions are looking a little worse for wear, don\u2019t despair \u2013 they can be easily given a new lease of life with some fabric and a few staples. In this post, we\u2019ll show you how to make covers for your outdoor cushions, so you can keep them looking great year after year.\n\nWhat You\u2019ll Need\n\n
To make covers for your outdoor cushions, you\u2019ll need the following materials:\n\n– Fabric: enough to cover all of your cushions (plus a little extra in case of mistakes!)\n+ A stapler \n
– Scissors\n\n– Measuring tape or ruler\n\nInstructions \n
1. Measure your cushion top and bottom separately, then add 1 inch to each measurement to allow for seams. Cut two pieces of fabric out using these dimensions. \n2. Place the fabric right sides together and stitch around the perimeter, leaving a 3-inch gap along one side for turning. \n
3. Trim the corners, turn the cover right side out through the gap, and press flat. \t4. Fold in the raw edges of the opening before stapling the cover closed around the entire perimeter of the cushion. Be sure to evenly space your staples about 6 inches apart. \t
5 . That\u2019s it! <\/p>\n \n
If you’re looking for a way to add new life to your outdoor furniture, you may want to consider reupholstering your outdoor cushions. This is a relatively easy project that can be done in a day or two, and it’s a great way to personalize your space while also extending the life of your furniture.\n\nWhen you’re ready to get started, the first thing you’ll need to do is measure your cushions.
You’ll need to know the width, length, and thickness of each cushion so that you can purchase enough fabric to cover them. Once you have your measurements, head to your local fabric store and pick out a fabric that you love. Outdoor fabrics are typically made from durable materials like Sunbrella or canvas, so they can withstand sunlight and moisture without fading or mildewing.\n\n
Once you have your fabric, it’s time to start reupholstering! First, remove the old fabric from the cushion by carefully cutting away any staples or fasteners. Then, using a staple gun or upholstery tacks, attach the new fabric around the edge of the cushion.
Be sure to pull the fabric taut as you go so that there are no wrinkles or sagging spots when you’re finished. When all four sides are covered, trim away any excess fabric and replace any buttons or embellishments that were on the original cushion.<\/p>\n \n
If you’re looking for some free sewing patterns for outdoor furniture cushions, look no further! Here are a few great options that will help you add some extra comfort and style to your patio or deck furniture.\n\n1. The first option is this simple design from Ana White.
It features a single large cushion that can be easily sewn up using a basic sewing machine.\n\n2. This next pattern, from SewCanShe, is a bit more complex but still easy to follow. It includes instructions for making both the front and back of the cushion, as well as piping around the edge.\n\n
3. For something a little different, check out this tutorial from Prudent Baby. It shows you how to make an envelope-style cushion cover that’s perfect for protecting your cushions from the elements.\n\n4. Finally, if you want something really unique, take a look at this tutorial from Ruffles and Stuff.
It walks you through the process of creating your own ruffled cushion covers using fabric strips and a hot glue gun!<\/p>\n \n
<\/p>\n \n
If your outdoor furniture cushions have seen better days, you may be wondering if they can be recovered. The good news is that most outdoor cushions can be recovered, as long as they are not too badly damaged. Here are some tips on how to go about recovering your outdoor furniture cushions.\n\n
The first step is to remove the old cushion covers. This can be done by carefully cutting them off with a sharp knife or scissors. If the covers are attached with Velcro, you may be able to simply peel them off.
Once the old covers are removed, you will need to measure the cushions so that you can cut new covers from fabric.\n\nWhen choosing fabric for your new cushion covers, it is important to choose something that is durable and weather-resistant. Outdoor fabrics such as Sunbrella or marine grade vinyl are a good choice.
You will also need to purchase some sort of padding for your cushions. Foam is a popular choice, but you could also use batting or quilt stuffing.\n\nOnce you have all of your materials ready, you can begin sewing your new cushion covers.
If you do not know how to sew, there are plenty of instructional videos and articles online that can teach you what you need to know. Sewing machine needles designed for outdoor fabrics can also be found at most craft stores.\n\nOnce your cushion covers are finished, simply slip them over your existing cushions and secure in place with Velcro or ties.
Your outdoor furniture will look good as new in no time!<\/p>\n \n
If you’re looking for a cheap way to cover your outdoor cushions, there are a few options available to you. First, you could try using old sheets or tablecloths. Simply drape the fabric over the cushion and secure it in place with safety pins or string.
Another option is to purchase some inexpensive fabric from a fabric store and sew your own covers. If you’re not particularly handy with a needle and thread, you can also use iron-on adhesive tape to create no-sew covers. Simply cut the fabric into the desired shape and size, then attach it to the cushion with the adhesive tape.<\/p>\n \n
Outdoor cushions can be a great way to add comfort and style to your patio furniture, but they can be a pain to keep clean and protected from the elements. If you don’t want to sew your own covers, there are a few different ways you can go about it.\n\nOne option is to purchase ready-made covers specifically designed for outdoor cushions.
These can be found at most home improvement or patio stores, and they’re usually made out of durable materials like vinyl or polyester. Another option is to use a tarp or heavy-duty plastic sheeting to cover your cushions. This will provide protection from the rain and sun, but it won’t look as nice as using dedicated covers.
Finally, if you’re really in a pinch, you can always just put your cushions inside during bad weather. This isn’t the ideal solution, but it will protect them from getting ruined by the elements.<\/p>\n \n
If you’re looking for an outdoor cushion with a little extra support, polyester fill is a great option. This type of filling is also moisture-resistant, so it’s ideal for use on patio furniture or in other wetter environments. Another plus is that polyester fill is easy to care for – simply spot clean as needed.<\/p>\n \n
If your outdoor chair cushions are looking a little worse for wear, it might be time to reupholster them. This process is actually not as difficult as you might think, and it can save you a lot of money compared to buying new cushions. Here are the steps you need to follow to reupholster an outdoor chair cushion:\n\n
1. Remove the old fabric from the cushion. You can do this by cutting along the seams with a sharp knife or scissors.\n\n2. Measure the width and length of the cushion so that you know how much new fabric you will need.
Add an extra inch or two all around for seam allowance.\n\n3. Cut out your new fabric using these measurements. If you want to add any embellishments like piping or tufting, do so now before sewing the fabric together.\n\n
4. Sew the new fabric together, leaving a small opening at one end so that you can insert the stuffing later on. Turn the cushion cover right side out through this opening and then stuff it with polyester filling until it is plump and firm again.\n\n5 .
Hand-sew the opening closed and voila \u2013 your old outdoor chair cushion is good as new!<\/p>\n \n