{"id":16010,"date":"2022-08-24T09:55:35","date_gmt":"2022-08-24T09:55:35","guid":{"rendered":"https:\/\/livingscented.com\/?p=16010"},"modified":"2022-08-24T09:55:35","modified_gmt":"2022-08-24T09:55:35","slug":"how-to-reupholster-an-armless-slipper-chair","status":"publish","type":"post","link":"https:\/\/livingscented.com\/how-to-reupholster-an-armless-slipper-chair\/","title":{"rendered":"How to Reupholster an Armless Slipper Chair?"},"content":{"rendered":"\n            <p>Assuming you have a basic understanding of sewing and upholstery, reupholstering an armless slipper chair is not a difficult task. The first step is to remove the old fabric from the chair. This can be done by carefully cutting away the staples or tacks that are holding the fabric in place. <br><br>Once the staples or tacks are removed, the old fabric should easily come off of the chair. If it does not, you may need to use a putty knife or similar tool to loosen it before proceeding.<\/p>\n             \n                        <ul><li> Remove the old fabric from the chair<\/li><li> Use a screwdriver to remove any staples that are holding the fabric in place<\/li><li> Cut new fabric to size<\/li><li> You will need enough to cover the entire chair, plus an extra few inches to allow for tucking and pleating<\/li><li> Begin attaching the new fabric at the center back of the chair<\/li><li> Use a staple gun to secure it in place<\/li><li> Work your way around to the front of the chair, pulling the fabric tight as you go and stapling it in place every few inches<\/li><\/ul>\n                        \n                    \n            <h2>How to Reupholster an Armless Leisure Chair<\/h2>\n            \n    <figure class=\"wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio\"><div class=\"wp-block-embed__wrapper\">\n    <iframe loading=\"lazy\" title=\"How to Reupholster an Armless Leisure Chair\" width=\"640\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/etZ6vAjGQIU?feature=oembed\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen><\/iframe>\n    <\/div><\/figure>\n            <h2>How Do You Make a Slipcover for an Armless Slipper Chair? <\/h2>\n            \n            <p>Assuming you would like a step-by-step guide on how to make a slipcover for an armless slipper chair: \n\nYou will need the following materials: \n1 yard of heavy decorator fabric\n<br><br>Scissors\nThread\nSewing machine\n<br><br>Pins\nUpholstery needle\n4 inch strip of Velcro (2 pieces)\n\n<br><br>Instructions: \n1. Cut your fabric. You will need two rectangles that are 24 inches wide and 36 inches long, and two 19-inch squares. <br><br>Set the two rectangles aside.\n\n2. Fold each square in half diagonally and cut along the fold to create two triangles. These will be your side panels.\n\n<br><br>3. To make the ruffles, take one of the rectangles and fold it in half lengthwise with wrong sides together. Sew a gathering stitch along both long sides, about 1\/4 inch from the edge. Do not knot your thread at either end; you&#8217;ll need to be able to pull it later.\n\n<br><br>4. Gently gather the fabric along the stitching until it is about half its original width. Pin the gathered edge to one of the short edges of one of the side panels, matching raw edges and making sure that the gathers are evenly distributed. Sew in place with a 1\/2-inch seam allowance, removing the pins as you go. Repeat with remaining ruffle and side panel.\n\n<\/p>\n            \n            <h2>How Many Yards Does It Take to Reupholster a Slipper Chair? <\/h2>\n            \n            <p>If you&#8217;re planning to reupholster a slipper chair, you&#8217;ll need about 3 yards of fabric. This will allow you to cover the entire chair, including the seat, back and sides. You may need more or less fabric depending on the size of your chair and the type of fabric you choose.<\/p>\n            \n            <h2>How Do You Reupholster an Arm Rest Chair? <\/h2>\n            \n            <p>Assuming you would like a step-by-step guide on how to reupholster an arm rest chair: \n\n1.Start by removing the old fabric from the chair. Use a screwdriver or utility knife to remove the staples or tacks holding the fabric in place. <br><br>If the fabric is glued down, you may need to use a putty knife to loosen it. Be careful not to damage the wood underneath as you remove the old fabric.\n2. Once the old fabric is removed, use a vacuum cleaner attachment or brush to remove any dirt and debris from the chair\u2019s surface.\n<br><br>3. Next, measure your new piece of fabric against the chair, allowing for extra material if you plan on pattern matching. Cut your new piece of fabric accordingly.\n4 .<br><br>To attach your new piece of fabric, start by stapling or tacking it into place at one end of the armrest. Then, gradually pull the fabric tight and staple or tack it into place at intervals along both sides of the armrest until you reach the other end. 5 .<br><br>Repeat steps 3 and 4 for each additional armrest on your chair until all are complete..<\/p>\n            \n            <h2>How Do You Reupholster a Chair Without Removing Old Fabric? <\/h2>\n            \n            <p>If you&#8217;re looking to reupholster a chair without removing old fabric, there are a few things you&#8217;ll need to do. First, remove any loose or damaged fabric from the chair. Next, use a staple gun to attach new fabric to the seat and back of the chair. <br><br>Be sure to pull the fabric tight so that it doesn&#8217;t sag when you sit in the chair. Finally, use trim to cover any exposed staples or edges of fabric.<\/p>\n            \n                                            <p><\/p>\n                                             \n            <h2>How to Upholster the Back of a Chair <\/h2>\n            \n            <p>If your chair has seen better days but the frame is still in good condition, it&#8217;s time to reupholster the back. This project isn&#8217;t as difficult as it may seem, and you&#8217;ll be rewarded with a refreshed piece of furniture that will last for years to come. Here&#8217;s how to upholster the back of a chair:\n\n<br><br>1. Remove the old fabric. Use a screwdriver to remove any staples or tacks holding the fabric in place. If the fabric is glued on, use a putty knife to gently pry it off.\n\n<br><br>2. Clean the frame. Once the old fabric is removed, give the frame a good cleaning with a mild soap and water solution. Let it dry completely before proceeding.\n\n<br><br>3. Apply new fabric. Start by stapling or gluing one side of the new fabric in place. Then stretch it across the back of the chair and staple or glue it into place on the other side. <br><br>Trim away any excess fabric, leaving about 1\/2 inch around all edges.\n\n4 . Attach buttons (optional). <br><br>For a finishing touch, you can add buttons to your newly upholstered chair back using matching thread and needle (or hot glue). <\/p>\n            \n            <h2>Slipper Chair Slipcover <\/h2>\n            \n            <p>A slipper chair is a small, comfortable chair without arms or a back. It is usually upholstered in fabric, and often has a skirt or fringe around the bottom. A slipcover is a removable piece of cloth or other material that covers furniture to protect it from dust, dirt, stains, and other damage. \n\n<br><br>Slipper chairs are not only stylish but also practical. Their small size makes them perfect for tight spaces, and their lack of arms and backs make them easy to move around. Slipcovers can help extend the life of your furniture by protecting it from wear and tear. <br><br>Plus, they&#8217;re easy to clean &#8211; just throw them in the washing machine when they get dirty! \n\nIf you&#8217;re looking for a way to add some extra seating to your home without sacrificing style or comfort, consider a slipper chair with a slipcover. You won&#8217;t be disappointed!<\/p>\n            \n            <h2>How to Reupholster an Accent Chair With Arms <\/h2>\n            \n            <p>Reupholstering an accent chair with arms is a great way to add a personal touch to your home d\u00e9cor. The process is not difficult, but there are a few things you need to know before you get started. Here are the basics of how to reupholster an accent chair with arms:\n\n<br><br>1. Remove the old fabric from the chair. This can be done by carefully taking off the staples or tacks that hold it in place. If you&#8217;re not sure how to do this, consult a professional upholsterer or take the chair to a local furniture store for assistance.\n\n<br><br>2. Clean and prepare the chair frame. Once the old fabric has been removed, use a soft cloth to dust off any dirt or debris from the frame. If there are any cracks or damage, now is the time to repair them before proceeding.\n\n<br><br>3. Cut new fabric to size. Measure the dimensions of your chair frame and add several inches all around for overlap (this will be hidden when you staple or tack it into place). Cut out your new fabric using these dimensions as guidance.\n\n<br><br>4 . Attach new fabric to frame . Begin by stapling or tacking one side of the new fabric into place at the top of the chair back . <br><br>Then , stretch \tthe material taunt and continue attaching it along \tthe other three sides , making sure there is no slack anywhere . Use as many staples or tacks as necessary to keep \tit secure ; just be careful not overwrite existing holes in \tthe wood so they&#8217;ll be visible once everything is covered up .\n5 Trim away excess fabric   Once all four sides are attached , flip \tthe chair over and trim away any excess material that&#8217;s hanging down below . <br><br>Be sure not cut too close ; you don&#8217;t want    accidently slice through any of your newly attached fabric !<\/p>\n            \n            <h2>Conclusion <\/h2>\n            \n            \n            <p>In this blog post, the author details how to reupholster an armless slipper chair. The first step is to remove the old fabric from the chair, which can be done by either cutting it away or pulling it off (if it&#8217;s loose). Next, measure the new fabric and cut it to size. <br><br>Then, attach the new fabric to the chair using a staple gun. Finally, trim any excess fabric and enjoy your newly upholstered chair!<\/p>\n            \n    <script type=\"application\/ld+json\">\n        {\n        \"@context\": \"https:\/\/schema.org\",\n        \"@type\": \"FAQPage\",\n      \"mainEntity\":[{\"@type\": \"Question\",\n        \n        \"name\": \"How Do You Make a Slipcover for an Armless Slipper Chair? \",\n        \n        \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \n        \"text\": \"\n\nAssuming you would like a step-by-step guide on how to make a slipcover for an armless slipper chair: \n\nYou will need the following materials: \n1 yard of heavy decorator fabric\nScissors\nThread\nSewing machine\nPins\nUpholstery needle\n4 inch strip of Velcro (2 pieces)\n\nInstructions: \n1. Cut your fabric. You will need two rectangles that are 24 inches wide and 36 inches long, and two 19-inch squares. Set the two rectangles aside.\n\n2. Fold each square in half diagonally and cut along the fold to create two triangles. These will be your side panels.\n\n3. To make the ruffles, take one of the rectangles and fold it in half lengthwise with wrong sides together. Sew a gathering stitch along both long sides, about 1\/4 inch from the edge. Do not knot your thread at either end; you'll need to be able to pull it later.\n\n4. Gently gather the fabric along the stitching until it is about half its original width. Pin the gathered edge to one of the short edges of one of the side panels, matching raw edges and making sure that the gathers are evenly distributed. Sew in place with a 1\/2-inch seam allowance, removing the pins as you go. Repeat with remaining ruffle and side panel.\n\n5 identifies where you will eventually sew velcro onto chair frame 5a&b identify top corners where you will eventually sew ties (optional) 6&7 identify bottom corners where you will eventually sew ties (optional) 8&9 identify middle front and back sections where you will eventually sew darts 10&11identify armrest areas (if applicable - this is an armless chair so there are no armrests) 12 indicates center back seam 13 indicates box pleat detail at center back 14 indicates welt cord piping detail (optional) 15&16 indicate sideseams 17 indicates welting or trim detail (optional) 18 indicates skirt hemline\"\n\n        \n        }\n        }\n        ,{\"@type\": \"Question\",\n        \n        \"name\": \"How Many Yards Does It Take to Reupholster a Slipper Chair? \",\n        \n        \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \n        \"text\": \"\n\nIf you're planning to reupholster a slipper chair, you'll need about 3 yards of fabric. This will allow you to cover the entire chair, including the seat, back and sides. You may need more or less fabric depending on the size of your chair and the type of fabric you choose.\"\n\n        \n        }\n        }\n        ,{\"@type\": \"Question\",\n        \n        \"name\": \"How Do You Reupholster an Arm Rest Chair? \",\n        \n        \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \n        \"text\": \"\n\nAssuming you would like a step-by-step guide on how to reupholster an arm rest chair: \n\n1.Start by removing the old fabric from the chair. Use a screwdriver or utility knife to remove the staples or tacks holding the fabric in place. If the fabric is glued down, you may need to use a putty knife to loosen it. Be careful not to damage the wood underneath as you remove the old fabric.\n2. Once the old fabric is removed, use a vacuum cleaner attachment or brush to remove any dirt and debris from the chair\u2019s surface.\n3. Next, measure your new piece of fabric against the chair, allowing for extra material if you plan on pattern matching. Cut your new piece of fabric accordingly.\n4 .To attach your new piece of fabric, start by stapling or tacking it into place at one end of the armrest. Then, gradually pull the fabric tight and staple or tack it into place at intervals along both sides of the armrest until you reach the other end. 5 .Repeat steps 3 and 4 for each additional armrest on your chair until all are complete..\"\n\n        \n        }\n        }\n        ,{\"@type\": \"Question\",\n        \n        \"name\": \"How Do You Reupholster a Chair Without Removing Old Fabric? \",\n        \n        \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \n        \"text\": \"\n\nIf you're looking to reupholster a chair without removing old fabric, there are a few things you'll need to do. First, remove any loose or damaged fabric from the chair. Next, use a staple gun to attach new fabric to the seat and back of the chair. Be sure to pull the fabric tight so that it doesn't sag when you sit in the chair. Finally, use trim to cover any exposed staples or edges of fabric.\"\n\n        \n        }\n        }\n        ]\n        }\n        <\/script>\n        \n    ","protected":false},"excerpt":{"rendered":"<p>Assuming you have a basic understanding of sewing and upholstery, reupholstering an armless slipper chair is not a difficult task. The first step is to remove the old fabric from<\/p>\n","protected":false},"author":6,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[20],"tags":[],"acf":[],"_links":{"self":[{"href":"https:\/\/livingscented.com\/wp-json\/wp\/v2\/posts\/16010"}],"collection":[{"href":"https:\/\/livingscented.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/livingscented.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/livingscented.com\/wp-json\/wp\/v2\/users\/6"}],"replies":[{"embeddable":true,"href":"https:\/\/livingscented.com\/wp-json\/wp\/v2\/comments?post=16010"}],"version-history":[{"count":1,"href":"https:\/\/livingscented.com\/wp-json\/wp\/v2\/posts\/16010\/revisions"}],"predecessor-version":[{"id":20333,"href":"https:\/\/livingscented.com\/wp-json\/wp\/v2\/posts\/16010\/revisions\/20333"}],"wp:attachment":[{"href":"https:\/\/livingscented.com\/wp-json\/wp\/v2\/media?parent=16010"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/livingscented.com\/wp-json\/wp\/v2\/categories?post=16010"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/livingscented.com\/wp-json\/wp\/v2\/tags?post=16010"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}