{"id":15901,"date":"2022-08-24T10:04:59","date_gmt":"2022-08-24T10:04:59","guid":{"rendered":"https:\/\/livingscented.com\/?p=15901"},"modified":"2022-08-24T10:04:59","modified_gmt":"2022-08-24T10:04:59","slug":"how-to-reupholster-an-arm-chair","status":"publish","type":"post","link":"https:\/\/livingscented.com\/how-to-reupholster-an-arm-chair\/","title":{"rendered":"How to Reupholster an Arm Chair?"},"content":{"rendered":"\n            <p>If you have an old armchair that is starting to show its age, you may want to consider reupholstering it. This can be a great way to give new life to a piece of furniture and save money at the same time. There are a few things you will need to do before you start, however, including removing the old fabric and measuring the chair. <br><br>You will also need to choose new fabric and padding that will be comfortable and look good with your existing decor.<\/p>\n             \n                        <ul><li> Remove the old fabric from the chair, being careful not to tear or damage the underlying padding<\/li><li> Cut new fabric to size, allowing extra for seams and tucking<\/li><li> Pin the fabric in place, starting at the center of the back and working your way around to the front<\/li><li> Hand-sew or machine-sew the new fabric in place<\/li><li> Be careful to sew only through the top layer of fabric, so that no stitches are visible on the right side<\/li><li> Reattach any trim or buttons that were removed during Step 1<\/li><\/ul>\n                        \n                    \n            <h2>UPHOLSTERY TIPS AND TRICKS | HOW TO REUPHOLSTER A CHAIR | ARMCHAIR UPHOLSTERY | FaceliftInteriors<\/h2>\n            \n    <figure class=\"wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio\"><div class=\"wp-block-embed__wrapper\">\n    <iframe loading=\"lazy\" title=\"UPHOLSTERY TIPS AND TRICKS | HOW TO REUPHOLSTER A CHAIR | ARMCHAIR UPHOLSTERY | FaceliftInteriors\" width=\"640\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/YV3pKgukJUQ?feature=oembed\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen><\/iframe>\n    <\/div><\/figure>\n            <h2>Is It Hard to Reupholster Armchair? <\/h2>\n            \n            <p>If you&#8217;re looking to give your home a fresh, new look, reupholstering your furniture is a great way to do it! While it might seem like a daunting task, reupholstering an armchair is actually not that difficult. With a little time and effort, you can easily transform an old, outdated piece of furniture into something beautiful and new.\n\n<br><br>The first step in reupholstering an armchair is to remove the old fabric. This can be done by gently pulling it away from the chair frame. If the fabric is attached with staples or nails, carefully remove them so as not to damage the wood. <br><br>Once the old fabric is removed, you&#8217;ll need to measure the seat and back of the chair to determine how much new fabric you&#8217;ll need. When purchasing your fabric, be sure to get enough to cover both the seat and back plus about two inches extra on all sides for seam allowance.\n\nWith your new fabric cut out and ready to go, begin by stapling or nailing it into place on the back of the chair. <br><br>Then move on to the seat, pulling the fabric taut as you go and stapling or nailing it into place. Once both the seat and back are covered, you can trim away any excess fabric before moving ontostep three: adding padding.\n\nAdding padding will make your armchair more comfortable while also giving it a nice, plush look. <br><br>You can use either foam padding or batting for this step; simply cut out pieces that will fit snugly inside your chair&#8217;s seat and back and staple or nail them into place. Be sure to add padding around all edges of the chair for best results.\n\nThe final step in reupholstering your armchair is attachingthe newfabric coveringto th e bottom ofthe chair frame using staplesor nails .<br><br>Finishbytrimming away any excessf abricand enjoyyour newly upholsteredpieceof furniture!<\/p>\n            \n            <h2>Can You Reupholster an Arm Chair? <\/h2>\n            \n            <p>Yes, you can reupholster an armchair. The process is not terribly difficult, but it does require some time and effort. You will need to remove the old fabric from the chair, which may be attached with staples, tacks or glue. <br><br>Once the old fabric is removed, you will need to measure and cut the new fabric to size. Then, you will attach the new fabric to the chair using whatever method was used to attach the old fabric (staples, tacks or glue). Finally, you will trim any excess fabric and enjoy your newly upholstered armchair!<\/p>\n            \n            <h2>How Do You Reupholster a Chair With Fabric on Arms? <\/h2>\n            \n            <p>If you have a chair with fabric on the arms that is starting to show wear, you may be considering reupholstering it. Here are the steps you&#8217;ll need to take to do the job right:\n\n1. Remove the old fabric. <br><br>Use a screwdriver or other sharp tool to loosen and remove the staples holding the fabric in place. If the fabric is glued on, you may be able to simply peel it off.\n\n2. Clean and prep the surface. <br><br>Once the old fabric is removed, give the chair&#8217;s surface a good cleaning with soapy water or another appropriate cleaner. This will help ensure that your new fabric adheres properly.\n\n3. Cut and attach your new fabric. <br><br>Measure and cut your new piece of fabric slightly larger than the area you&#8217;re covering (you can always trim it down if necessary). Attach the new fabric using either glue or staples, depending on what will work best with your particular chair. Start at one end and work your way around, pulling the fabric taut as you go.\n\n<br><br>4. Trim away any excess fabric and enjoy your newly upholstered chair!<\/p>\n            \n            <h2>How Do You Reupholster an Old Arm Chair? <\/h2>\n            \n            <p>Assuming you would like a blog post discussing how to reupholster an armchair: \n\nYou will need the following supplies: \n-Upholstery fabric\n<br><br>-Scissors\n-Staple gun and staples\n-Hammer\n<br><br>-Tacks (optional)\n-Padding (optional)\nInstructions: \n\n<br><br>1. Remove the old fabric from the chair. Start by taking off any dust cover or trim, then remove the staples or tacks holding the fabric in place. If the fabric is glued on, you may be able to peel it off. <br><br>Be careful not to tear the wood underneath as you remove the old upholstery.\n2. Inspect and repair the frame of the chair if necessary. Once the old fabric is removed, check for any damage to the frame of the chair. <br><br>Repair any cracks or breaks in the wood before proceeding with reupholstering. 3. Attach new padding if desired. You can attach new padding directly to the frame of the chair using adhesive spray or glue, stapling it in place, or tacking it down with small nails. <br><br>4. Cut your upholstery fabric to size and staple it into place. Start by draping your fabric over the back ofthe chair and pulling it tight around tothe front. Cut away any excess fabric, then staplethe fabric into place onthe underside ofthe seat using a heavy duty staple gun .5 Wrap and staple excessfabric aroundto them backof The Chair Turn The Chair Over so thatyou canreach The undersideofThe backrest easily .Smoothoutany wrinklesinThe Fabric ,ThenpullThe Fabric tauntandwrapit aroundto The backside ,CutoffanyexcessFabric ,Andstapleitinto place 6ReattachAnyTrimOrDustCover ThatWasRemoved earlier GentlyreplaceanytrimordustcoverthatwasremovedwhenYoufirststartedthisproject .<\/p>\n            \n                                            <p><\/p>\n                                             \n            <h2>How to Reupholster a Chair Without Removing Old Fabric <\/h2>\n            \n            <p>If you&#8217;re looking to give your chairs a fresh new look, reupholstering them is a great option! And it&#8217;s not as difficult as you might think. You can even do it without removing the old fabric, which can save you a lot of time and effort. <br><br>Here&#8217;s how:\n\n1. Start by giving your chairs a good vacuum. This will help to remove any dust or dirt that could potentially interfere with the adhesive you&#8217;ll be using later on.\n\n<br><br>2. Next, cut your new fabric to size. Make sure to leave enough excess material so that you can wrap it around the back of the chair and staple it in place.\n\n3. Once your fabric is cut, start applying adhesive to the underside of it. <br><br>Be generous with the adhesive so that it holds well. Then, starting at one end, begin wrapping the fabric around the chair until you reach the other end. Use a few staples to secure it in place temporarily while the adhesive dries completely (this usually takes about 24 hours).\n\n<br><br>4 . Once everything is dry, trim away any excess fabric and enjoy your newly upholstered chairs!<\/p>\n            \n            <h2>How to Reupholster an Armchair With Wooden Arms <\/h2>\n            \n            <p>Upholstering an armchair with wooden arms can be a bit tricky, but it&#8217;s definitely doable! Here are some tips to help you get started:\n\n1. Remove the old fabric and padding from the chair. <br><br>This will give you a better idea of how much new fabric and padding you&#8217;ll need.\n\n2. Cut your new fabric and padding to size. Make sure to leave enough excess fabric so that you can wrap it around the wooden arms.\n\n<br><br>3. Start attaching the new fabric to the bottom of the chair frame, working your way up. Use a staple gun or upholstery tacks to secure the fabric in place.\n\n4. Once the main body of the chair is covered, start attaching the padded armrests. <br><br>Again, use a staple gun or upholstery tacks to secure them in place.\n\n5. Trim any excess fabric from around the edges of the chair, then stand back and admire your handiwork!<\/p>\n            \n            <h2>How to Reupholster a Rocking Chair <\/h2>\n            \n            <p>Assuming you have a basic understanding of upholstery and sewing, reupholstering a rocking chair is not a difficult task. With a few tools and some patience, you can give an old piece of furniture new life. Here are the steps to take:\n\n<br><br>1. Remove the old fabric from the chair. This can be done by carefully taking off the staples or nails that hold it in place. If the fabric is glued on, you may need to use a putty knife or similar tool to loosen it before removing it completely.\n\n<br><br>2. Once the old fabric is removed, inspect the chair for any damage that may need to be repaired before proceeding. This could include cracks in the wood, broken joints, etc. Make any necessary repairs now.\n\n<br><br>3. Cut your new fabric to size, allowing for extra material at the seams. Be sure to also cut batting or foam if you&#8217;ll be using it (this adds padding and makes for a more comfortable seat).\n\n4. Begin attaching your new fabric starting at one end of the seat platform (the flat part where you sit). <br><br>Use either staples or nails to secure it in place, stretching the fabric taut as you go along. Work your way around all four sides until the entire platform is covered. Then do the same for each of the back slats (the vertical pieces).\n\n<br><br>5 . When all of The main pieces are covered , its time To add any final details like buttons tufting , Or welting . These steps are optional but can really elevate The look Of your finished product .  <br><br>Buttons And tufting require some additional materials And knowledge so be sure To do your research before attempting them .  Sewing welting Is relatively easy And simply Involves wrapping cord Or piping around The edge Of The upholstered piece before sewing It In place .  Once all Of The details are complete , enjoy Your newly refreshed rocking chair !<\/p>\n            \n            <h2>Conclusion <\/h2>\n            \n            \n            <p>In this blog post, the author explains how to reupholster an arm chair. The first step is to remove the old fabric from the chair. Next, you will need to measure the new fabric and cut it to size. <br><br>Then, you will need to attach the new fabric to the chair using a staple gun. Finally, you will need to trim any excess fabric and replace any buttons or tufts that were removed during the process.<\/p>\n            \n    <script type=\"application\/ld+json\">\n        {\n        \"@context\": \"https:\/\/schema.org\",\n        \"@type\": \"FAQPage\",\n      \"mainEntity\":[{\"@type\": \"Question\",\n        \n        \"name\": \"Is It Hard to Reupholster Armchair? \",\n        \n        \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \n        \"text\": \"\n\nIf you're looking to give your home a fresh, new look, reupholstering your furniture is a great way to do it! While it might seem like a daunting task, reupholstering an armchair is actually not that difficult. With a little time and effort, you can easily transform an old, outdated piece of furniture into something beautiful and new.\n\nThe first step in reupholstering an armchair is to remove the old fabric. This can be done by gently pulling it away from the chair frame. If the fabric is attached with staples or nails, carefully remove them so as not to damage the wood. Once the old fabric is removed, you'll need to measure the seat and back of the chair to determine how much new fabric you'll need. When purchasing your fabric, be sure to get enough to cover both the seat and back plus about two inches extra on all sides for seam allowance.\n\nWith your new fabric cut out and ready to go, begin by stapling or nailing it into place on the back of the chair. Then move on to the seat, pulling the fabric taut as you go and stapling or nailing it into place. Once both the seat and back are covered, you can trim away any excess fabric before moving ontostep three: adding padding.\n\nAdding padding will make your armchair more comfortable while also giving it a nice, plush look. You can use either foam padding or batting for this step; simply cut out pieces that will fit snugly inside your chair's seat and back and staple or nail them into place. Be sure to add padding around all edges of the chair for best results.\n\nThe final step in reupholstering your armchair is attachingthe newfabric coveringto th e bottom ofthe chair frame using staplesor nails .Finishbytrimming away any excessf abricand enjoyyour newly upholsteredpieceof furniture!\"\n\n        \n        }\n        }\n        ,{\"@type\": \"Question\",\n        \n        \"name\": \"Can You Reupholster an Arm Chair? \",\n        \n        \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \n        \"text\": \"\n\nYes, you can reupholster an armchair. The process is not terribly difficult, but it does require some time and effort. You will need to remove the old fabric from the chair, which may be attached with staples, tacks or glue. Once the old fabric is removed, you will need to measure and cut the new fabric to size. Then, you will attach the new fabric to the chair using whatever method was used to attach the old fabric (staples, tacks or glue). Finally, you will trim any excess fabric and enjoy your newly upholstered armchair!\"\n\n        \n        }\n        }\n        ,{\"@type\": \"Question\",\n        \n        \"name\": \"How Do You Reupholster a Chair With Fabric on Arms? \",\n        \n        \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \n        \"text\": \"\n\nIf you have a chair with fabric on the arms that is starting to show wear, you may be considering reupholstering it. Here are the steps you'll need to take to do the job right:\n\n1. Remove the old fabric. Use a screwdriver or other sharp tool to loosen and remove the staples holding the fabric in place. If the fabric is glued on, you may be able to simply peel it off.\n\n2. Clean and prep the surface. Once the old fabric is removed, give the chair's surface a good cleaning with soapy water or another appropriate cleaner. This will help ensure that your new fabric adheres properly.\n\n3. Cut and attach your new fabric. Measure and cut your new piece of fabric slightly larger than the area you're covering (you can always trim it down if necessary). Attach the new fabric using either glue or staples, depending on what will work best with your particular chair. Start at one end and work your way around, pulling the fabric taut as you go.\n\n4. Trim away any excess fabric and enjoy your newly upholstered chair!\"\n\n        \n        }\n        }\n        ,{\"@type\": \"Question\",\n        \n        \"name\": \"How Do You Reupholster an Old Arm Chair? \",\n        \n        \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \n        \"text\": \"\n\nAssuming you would like a blog post discussing how to reupholster an armchair: \n\nYou will need the following supplies: \n-Upholstery fabric\n-Scissors\n-Staple gun and staples\n-Hammer\n-Tacks (optional)\n-Padding (optional)\nInstructions: \n\n1. Remove the old fabric from the chair. Start by taking off any dust cover or trim, then remove the staples or tacks holding the fabric in place. If the fabric is glued on, you may be able to peel it off. Be careful not to tear the wood underneath as you remove the old upholstery.\n2. Inspect and repair the frame of the chair if necessary. Once the old fabric is removed, check for any damage to the frame of the chair. Repair any cracks or breaks in the wood before proceeding with reupholstering. 3. Attach new padding if desired. You can attach new padding directly to the frame of the chair using adhesive spray or glue, stapling it in place, or tacking it down with small nails. 4. Cut your upholstery fabric to size and staple it into place. Start by draping your fabric over the back ofthe chair and pulling it tight around tothe front. Cut away any excess fabric, then staplethe fabric into place onthe underside ofthe seat using a heavy duty staple gun .5 Wrap and staple excessfabric aroundto them backof The Chair Turn The Chair Over so thatyou canreach The undersideofThe backrest easily .Smoothoutany wrinklesinThe Fabric ,ThenpullThe Fabric tauntandwrapit aroundto The backside ,CutoffanyexcessFabric ,Andstapleitinto place 6ReattachAnyTrimOrDustCover ThatWasRemoved earlier GentlyreplaceanytrimordustcoverthatwasremovedwhenYoufirststartedthisproject .Securelyfastenitinto placewithnailsortacks\"\n\n        \n        }\n        }\n        ]\n        }\n        <\/script>\n        \n    ","protected":false},"excerpt":{"rendered":"<p>If you have an old armchair that is starting to show its age, you may want to consider reupholstering it. This can be a great way to give new life<\/p>\n","protected":false},"author":6,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[20],"tags":[],"acf":[],"_links":{"self":[{"href":"https:\/\/livingscented.com\/wp-json\/wp\/v2\/posts\/15901"}],"collection":[{"href":"https:\/\/livingscented.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/livingscented.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/livingscented.com\/wp-json\/wp\/v2\/users\/6"}],"replies":[{"embeddable":true,"href":"https:\/\/livingscented.com\/wp-json\/wp\/v2\/comments?post=15901"}],"version-history":[{"count":1,"href":"https:\/\/livingscented.com\/wp-json\/wp\/v2\/posts\/15901\/revisions"}],"predecessor-version":[{"id":20379,"href":"https:\/\/livingscented.com\/wp-json\/wp\/v2\/posts\/15901\/revisions\/20379"}],"wp:attachment":[{"href":"https:\/\/livingscented.com\/wp-json\/wp\/v2\/media?parent=15901"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/livingscented.com\/wp-json\/wp\/v2\/categories?post=15901"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/livingscented.com\/wp-json\/wp\/v2\/tags?post=15901"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}