{"id":15835,"date":"2022-09-26T10:51:33","date_gmt":"2022-09-26T10:51:33","guid":{"rendered":"https:\/\/livingscented.com\/?p=15835"},"modified":"2022-08-24T09:27:22","modified_gmt":"2022-08-24T09:27:22","slug":"how-to-reupholster-a-chair-seat-with-rounded-corners","status":"publish","type":"post","link":"https:\/\/livingscented.com\/how-to-reupholster-a-chair-seat-with-rounded-corners\/","title":{"rendered":"How to Reupholster a Chair Seat With Rounded Corners?"},"content":{"rendered":"\n            <p>If you&#8217;re looking to add a touch of elegance to your home, reupholstering a chair with rounded corners is a great way to do it. The process is relatively simple and only requires a few tools and materials. Here&#8217;s what you&#8217;ll need:\n\n<br><br>-A piece of fabric (enough to cover the seat plus an extra 2-3 inches all around)\n\n-Staple gun\n\n-Scissors\n\n<br><br>-Foam padding (optional)\n\n<\/p>\n             \n                        <ul><li> Remove the old fabric from the chair seat, being careful not to tear or damage the underlying foam<\/li><li> Using a sharp pair of scissors, cut around the perimeter of the foam to create a new, clean edge<\/li><li> Place the foam on top of your new fabric, and trace around its perimeter with a pencil or chalk<\/li><li> Cut out the fabric along your tracing line, leaving about 1-2 inches of extra fabric all around<\/li><li> Begin stapling the fabric to the underside of the chair seat frame, pulling it taut as you go and working your way around evenly until all sides are secure<\/li><li> Trim away any excess fabric, and enjoy your newly reupholstered chair seat!<\/li><\/ul>\n                        \n                    \n            <h2>Recovering a shaped curved back dining chair seat pad<\/h2>\n            \n    <figure class=\"wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio\"><div class=\"wp-block-embed__wrapper\">\n    <iframe loading=\"lazy\" title=\"Recovering a shaped curved back dining chair seat pad\" width=\"640\" height=\"360\" src=\"https:\/\/www.youtube.com\/embed\/_kw0vGVzRSg?feature=oembed\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen><\/iframe>\n    <\/div><\/figure>\n            <h2>Types of Upholstery Corners <\/h2>\n            \n            <p>If you&#8217;re looking to upholster a piece of furniture, you&#8217;ll need to know about the different types of upholstery corners. Here&#8217;s a rundown of the most common types:\n\nPleated corners are created by folding fabric over itself and stapling it in place. <br><br>This type of corner is often used on furniture with rounded edges.\n\nCorded corners are similar to pleated corners, but they&#8217;re finished with a cord trim. This gives the corner a clean, finished look.\n\n<br><br>Welted corners have piping that runs along the edge of the fabric. This type of corner is often used on formal furniture pieces.\n\nFlanged corners are created by turning the fabric under and stitching it in place. <br><br>This gives the corner a clean, finished look.<\/p>\n            \n            <h2>Vinyl Upholstery Corners Techniques <\/h2>\n            \n            <p>If you&#8217;re upholstering a piece of furniture with vinyl fabric, you&#8217;ll want to pay special attention to the corners. Vinyl is a little trickier to work with than other fabrics because it&#8217;s not as forgiving. But don&#8217;t worry, with a little patience and attention to detail, you can achieve professional-looking results.\n\n<br><br>Here are some tips for working with vinyl fabric in corners:\n\n1. Start by cutting your fabric at a 45 degree angle. This will help reduce bulk in the corners and make it easier to work with the fabric.\n\n<br><br>2. Next, apply adhesive to the back side of the vinyl fabric. Be sure to use an upholstery adhesive that is specifically designed for vinyl fabrics.\n\n3. Once the adhesive is applied, start pressing the fabric into place around the corner of the furniture piece. <br><br>Use your hands or a soft cloth to smooth out any wrinkles or bubbles.\n\n4. Finally, trim away any excess fabric using sharp scissors or an exacto knife. Be careful not to cut too close to the edge of the vinyl so you don&#8217;t damage it.<\/p>\n            \n            <h2>How to Reupholster a Chair Seat With Foam <\/h2>\n            \n            <p>Have you ever looked at a chair and thought, &#8220;I could reupholster that!&#8221; Well, now&#8217;s your chance! Here&#8217;s a step-by-step guide on how to reupholster a chair seat with foam.\n\n<br><br>You&#8217;ll need:\n\n&#8211; A piece of plywood or hardboard, cut to the size of your seat plus 1 inch all around\n\n&#8211; A piece of high-density foam, cut to the size of your plywood or hardboard plus 1 inch all around\n\n<br><br>&#8211; A stapler and staples (1\/4 inch crown, length depending on thickness of foam and wood)\n &#8211; Upholstery fabric (enough to cover the front and back of your seat plus 2 inches all around)  &#8211; Foam adhesive spray  &#8211; Scissors  &#8211; Pencil  &#8211; Measuring tape   First, remove the old upholstery from your chair seat. You can do this by carefully prying up the staples with a screwdriver or pliers. <br><br>Once the staples are removed, you should be able to pull off the fabric easily. If not, use a utility knife to carefully cut through any remaining fabric adhesive.\n\n Next, lay your piece of plywood or hardboard on top of the foam. <br><br>Trace around it with a pencil so you know where to cut. Cut out the traced shape from the foam using scissors or an electric carving knife.\n\nSpray one side of the foam with adhesive and press it onto the plywood or hardboard. <br><br>Make sure there is good coverage so that it will adhere properly. Let it dry for at least 30 minutes before proceeding.\n\n Now it&#8217;s time to start stapling! <br><br>Start in the middle of one side and work your way out towards the corners. Be sure to staple evenly across each side so that the fabric is pulled taunt. Repeat this process on all four sides until you&#8217;ve reached each corner. Trim off any excess fabric with scissors then flip over your seat and admire your handiwork!<\/p>\n            \n            <h2>How to Upholster Corners With Thick Fabric <\/h2>\n            \n            <p>If you&#8217;re working with a thick fabric like denim, you&#8217;ll want to take extra care when upholstering corners. Here&#8217;s how to do it:\n\n1. Cut four pieces of fabric, each about 1&#8243; wider and 1&#8243; longer than the dimensions of your corner.\n\n<br><br>2. Fold each piece in half lengthwise, wrong sides together, and press.\n\n3. Pin the four pieces together at the corners, matching up the raw edges and the folded edges. Sew around all four sides with a \u00bd&#8221; seam allowance, leaving an opening for turning on one side.\n\n<br><br>4. Trim the excess fabric from the corners and turn the piece right side out through the opening. Press flat.\n\n5. Slipstitch the opening closed by hand or machine stitch it close to the edge using a very small seam allowance (\u215b&#8221;).<\/p>\n            \n                                            <p><\/p>\n                                             \n            <h2>How Do You Upholster a Curved Corner? <\/h2>\n            \n            <p>When you upholster a piece of furniture, you are essentially covering it in fabric. This can be done for both aesthetic and functional purposes. Aesthetically, upholstery can add color, pattern, and texture to a room. <br><br>It can also make old furniture look new again. Functionally, upholstery can protect furniture from wear and tear, as well as dirt and spills.\n\nUpholstering a curved corner is not terribly difficult, but it does require some attention to detail. <br><br>The first step is to cut your fabric to the appropriate size. You will need enough fabric to wrap around the curve of the corner plus an additional inch or two for seam allowances. Once you have your fabric cut out, lay it down flat on a work surface with the wrong side facing up.\n\n<br><br>Next, take your foam padding and cut it to fit the curve of the corner (again allowing for seam allowances). Place the foam padding on top of the wrong side of the fabric and pin in place.\n\nNow you are ready to sew! <br><br>Start by sewing a straight line along one edge of the foam padding. Then pivot at the corner and sew along the curve until you reach the other edge of the foam padding. Trim away any excess fabric or foam padding before moving on to the next step.\n\n<br><br>Now it&#8217;s time to attach your fabric to the piece of furniture itself. If you are working with a chair or sofa that has removable seat cushions, this will be easy &#8211; simply slip your newly sewn cushion cover over each cushion and replace them on the furniture piece. If not, you will need to staple or glue your fabric in place (depending on what type of adhesive is safe for use on your particular piece of furniture). <\/p>\n            \n            <h2>How Do You Upholster a Curve? <\/h2>\n            \n            <p>If you want to upholster a curve, you&#8217;ll need to use some basic techniques. First, you&#8217;ll need to cut the fabric to the correct size. Next, you&#8217;ll need to attach the fabric to the frame using either staples or tacks. <br><br>Once the fabric is attached, you can start pulling it tight and stapling or tacking it in place. Finally, you can trim off any excess fabric and enjoy your new upholstered piece!<\/p>\n            \n            <h2>How Do You Upholster a Chair With a Corner? <\/h2>\n            \n            <p>When it comes to upholstering a chair with corners, there are a few things you need to keep in mind. First, you&#8217;ll want to make sure that the fabric you&#8217;re using is big enough to cover the entire chair, including the corners. You may need to piece together multiple pieces of fabric or use a larger piece and cut it down to size.\n\n<br><br>Next, you&#8217;ll need to start stapling the fabric into place around the perimeter of the chair, making sure to pull it tight as you go. Once you&#8217;ve gone all the way around, it&#8217;s time to start working on the corners. For each corner, fold the fabric so that it forms a neat triangle and then staple it into place. <br><br>Continue doing this until all four corners are complete.\n\nAnd that&#8217;s it! You&#8217;ve now successfully upholstered a chair with corners.<\/p>\n            \n            <h2>How Do You Reupholster a Rounded Chair? <\/h2>\n            \n            <p>Assuming you would like a blog post discussing how to reupholster a rounded chair: \n\n&#8220;How to Reupholster a Rounded Chair&#8221;\n\n\nIf your favorite chair is starting to show its age, don\u2019t toss it out \u2013 give it new life with this guide on how to reupholster a rounded chair. <br><br>You\u2019ll not only save money, but you\u2019ll end up with a piece that\u2019s uniquely yours.\n\nWhat You&#8217;ll Need:\n-Screwdriver\n<br><br>-Staple gun and staples\n-Plywood (optional)\n-Tape measure\n<br><br>-Upholstery fabric of your choice\n-Batting or foam padding (optional)\n\n Step One: Remove the Old Fabric  First things first \u2013 you need to remove the old fabric from your chair. <br><br>This part can be tricky, depending on how the original fabric was attached. Start by removing any screws or nails holding the fabric in place. Then, gently pull the fabric away from the frame of the chair, being careful not to tear it. <br><br>Once the old fabric is off, remove any old batting or foam padding before moving on to step two.\n\n Step Two: Attach New Fabric If you plan on using new batting or foam padding, now is the time to attach it to your chair using spray adhesive or staples. Be sure to smooth out any wrinkles or creases as you go. <br><br>Once your batting is in place, it&#8217;s time to cut and attach your new upholstery fabric. Cut your fabric slightly larger than needed so you have some wiggle room when attaching it later on. Center your pattern if applicable before stapling the fabric into place along the back edge of your chair first. <\/p>\n            \n            <h2>Conclusion <\/h2>\n            \n            \n            <p>If you have a chair with rounded corners, you may think that you can&#8217;t reupholster the seat yourself. However, it is possible to do this by following a few simple steps. First, remove the old fabric from the seat and use a template to cut out new fabric. <br><br>Next, staple the new fabric in place and trim away any excess. Finally, reattach the seat to the chair frame and enjoy your newly upholstered chair!<\/p>\n            \n    <script type=\"application\/ld+json\">\n        {\n        \"@context\": \"https:\/\/schema.org\",\n        \"@type\": \"FAQPage\",\n      \"mainEntity\":[{\"@type\": \"Question\",\n        \n        \"name\": \"How Do You Upholster a Curved Corner? \",\n        \n        \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \n        \"text\": \"\n\nWhen you upholster a piece of furniture, you are essentially covering it in fabric. This can be done for both aesthetic and functional purposes. Aesthetically, upholstery can add color, pattern, and texture to a room. It can also make old furniture look new again. Functionally, upholstery can protect furniture from wear and tear, as well as dirt and spills.\n\nUpholstering a curved corner is not terribly difficult, but it does require some attention to detail. The first step is to cut your fabric to the appropriate size. You will need enough fabric to wrap around the curve of the corner plus an additional inch or two for seam allowances. Once you have your fabric cut out, lay it down flat on a work surface with the wrong side facing up.\n\nNext, take your foam padding and cut it to fit the curve of the corner (again allowing for seam allowances). Place the foam padding on top of the wrong side of the fabric and pin in place.\n\nNow you are ready to sew! Start by sewing a straight line along one edge of the foam padding. Then pivot at the corner and sew along the curve until you reach the other edge of the foam padding. Trim away any excess fabric or foam padding before moving on to the next step.\n\nNow it's time to attach your fabric to the piece of furniture itself. If you are working with a chair or sofa that has removable seat cushions, this will be easy - simply slip your newly sewn cushion cover over each cushion and replace them on the furniture piece. If not, you will need to staple or glue your fabric in place (depending on what type of adhesive is safe for use on your particular piece of furniture). Start by pulling your fabric taut and stapling or gluing it along one edge; then continue working around all four sides until everything is secure\"\n\n        \n        }\n        }\n        ,{\"@type\": \"Question\",\n        \n        \"name\": \"How Do You Upholster a Curve? \",\n        \n        \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \n        \"text\": \"\n\nIf you want to upholster a curve, you'll need to use some basic techniques. First, you'll need to cut the fabric to the correct size. Next, you'll need to attach the fabric to the frame using either staples or tacks. Once the fabric is attached, you can start pulling it tight and stapling or tacking it in place. Finally, you can trim off any excess fabric and enjoy your new upholstered piece!\"\n\n        \n        }\n        }\n        ,{\"@type\": \"Question\",\n        \n        \"name\": \"How Do You Upholster a Chair With a Corner? \",\n        \n        \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \n        \"text\": \"\n\nWhen it comes to upholstering a chair with corners, there are a few things you need to keep in mind. First, you'll want to make sure that the fabric you're using is big enough to cover the entire chair, including the corners. You may need to piece together multiple pieces of fabric or use a larger piece and cut it down to size.\n\nNext, you'll need to start stapling the fabric into place around the perimeter of the chair, making sure to pull it tight as you go. Once you've gone all the way around, it's time to start working on the corners. For each corner, fold the fabric so that it forms a neat triangle and then staple it into place. Continue doing this until all four corners are complete.\n\nAnd that's it! You've now successfully upholstered a chair with corners.\"\n\n        \n        }\n        }\n        ,{\"@type\": \"Question\",\n        \n        \"name\": \"How Do You Reupholster a Rounded Chair? \",\n        \n        \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \n        \"text\": \"\n\nAssuming you would like a blog post discussing how to reupholster a rounded chair: \n\nHow to Reupholster a Rounded Chair\n\n\nIf your favorite chair is starting to show its age, don\u2019t toss it out \u2013 give it new life with this guide on how to reupholster a rounded chair. You\u2019ll not only save money, but you\u2019ll end up with a piece that\u2019s uniquely yours.\n\nWhat You'll Need:\n-Screwdriver\n-Staple gun and staples\n-Plywood (optional)\n-Tape measure\n-Upholstery fabric of your choice\n-Batting or foam padding (optional)\n\n Step One: Remove the Old Fabric  First things first \u2013 you need to remove the old fabric from your chair. This part can be tricky, depending on how the original fabric was attached. Start by removing any screws or nails holding the fabric in place. Then, gently pull the fabric away from the frame of the chair, being careful not to tear it. Once the old fabric is off, remove any old batting or foam padding before moving on to step two.\n\n Step Two: Attach New Fabric If you plan on using new batting or foam padding, now is the time to attach it to your chair using spray adhesive or staples. Be sure to smooth out any wrinkles or creases as you go. Once your batting is in place, it's time to cut and attach your new upholstery fabric. Cut your fabric slightly larger than needed so you have some wiggle room when attaching it later on. Center your pattern if applicable before stapling the fabric into place along the back edge of your chair first. Then move on around all sides, pulling taught and smoothing as you go until everything is tight and wrinkle-free\"\n\n        \n        }\n        }\n        ]\n        }\n        <\/script>\n        \n    ","protected":false},"excerpt":{"rendered":"<p>If you&#8217;re looking to add a touch of elegance to your home, reupholstering a chair with rounded corners is a great way to do it. The process is relatively simple<\/p>\n","protected":false},"author":6,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[20],"tags":[],"acf":[],"_links":{"self":[{"href":"https:\/\/livingscented.com\/wp-json\/wp\/v2\/posts\/15835"}],"collection":[{"href":"https:\/\/livingscented.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/livingscented.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/livingscented.com\/wp-json\/wp\/v2\/users\/6"}],"replies":[{"embeddable":true,"href":"https:\/\/livingscented.com\/wp-json\/wp\/v2\/comments?post=15835"}],"version-history":[{"count":1,"href":"https:\/\/livingscented.com\/wp-json\/wp\/v2\/posts\/15835\/revisions"}],"predecessor-version":[{"id":19310,"href":"https:\/\/livingscented.com\/wp-json\/wp\/v2\/posts\/15835\/revisions\/19310"}],"wp:attachment":[{"href":"https:\/\/livingscented.com\/wp-json\/wp\/v2\/media?parent=15835"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/livingscented.com\/wp-json\/wp\/v2\/categories?post=15835"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/livingscented.com\/wp-json\/wp\/v2\/tags?post=15835"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}