Why is My Big Joe Chair is Flat?

It’s happened to the best of us. You’re sitting in your Big Joe chair, enjoying its comfort and support, when suddenly you notice that it’s not quite as puffy as it used to be. In fact, it seems downright flat!

Don’t worry, there are a few reasons why this might happen and fortunately, there are also a few easy solutions. One reason your Big Joe chair might be flat is simply because it’s been used a lot. The more you sit in it, the flatter it will become.

This is especially true if you like to sink into your chair or if you tend to move around a lot while you’re sitting. Another possibility is that the temperature has something to do with it. If it’s cold outside, your chair could deflate slightly due to the change in temperature.

Have you ever had a Big Joe chair that suddenly went flat? It’s frustrating, especially when you’re trying to relax in your chair. Here’s a look at why this happens and how to fix it.

The most likely reason your Big Joe chair is flat is because the air valve is damaged or defective. When this happens, air can escape from the chamber, causing the chair to go flat. Fortunately, this is an easy problem to fix.

Simply find a replacement valve and install it. Once you do, your chair should be good as new! If the air valve isn’t the problem, then there may be an issue with the internal structure of the chair.

Over time, these chairs can start to sag in the middle, which will cause them to go flat. To fix this, you’ll need to reinforcing the frame of the chair. This can be done by adding additional supports or by replacing worn out parts.

Either way, once you’ve taken care of the issue, your Big Joe Chair should be good as new!

How Do You Fix a Flat Bean Bag Chair?

If your bean bag chair has lost its shape or has developed a flat spot, there are a few things you can do to fix it. First, try fluffing the bean bag by hand or with a machine. You can also try placing the bean bag in a dryer on low heat for 10-15 minutes.

If neither of these methods work, you may need to add more beans to the bean bag. To do this, simply unzip the bean bag and add more beans until it is full again. Once you have added the beans, be sure to zip up the bean bag tightly so that the beans stay in place.

How Do You Fluff a Big Joe Bean Bag?

If you’ve ever sat in a bean bag, you know how comfortable they can be. But what if your bean bag has lost its fluff? Fluffing a bean bag is actually quite easy – all you need is some time and a little bit of effort.

First, remove the cover from the bean bag. If your bean bag doesn’t have a removable cover, you can still fluff it, but it will be more difficult. Once the cover is off, take the beans out of the bag and spread them evenly on a large surface.

Next, using your hands or a rolling pin, gently roll over the beans to break them up. You don’t want to pulverize them – just break them into smaller pieces. Once they’re broken up, put them back into the bean bag and fluff them up with your hands.

Finally, put the cover back on the bean bag and enjoy your newly fluffed seat!

How Do You Fill Big Joe Chairs?

Assuming you are referring to the Big Joe bean bag chairs, they can be filled a few different ways. The most common way is to purchase the refill beans that are made specifically for these chairs. You can also fill them with polystyrene pellets, which can be found at most craft stores.

Finally, you can also use regular stuffing from a pillow or couch cushion.

How Long Does a Big Joe Last?

Assuming you are referring to the Big Joe bean bag chair, they usually last around 3-5 years. However, this can vary depending on how often it is used and how well it is taken care of. For example, if you use your Big Joe chair every day, it will probably only last about 3 years.

But if you only use it occasionally and take good care of it (i.e. don’t spill anything on it, etc.), then it could potentially last up to 5 years or even longer.

How to Open Big Joe Bean Bag Zipper

If you have a Big Joe bean bag, you may be wondering how to open the zipper. The zipper is located on the bottom of the bean bag, and it can be a little tricky to find. Once you find it, though, opening the zipper is easy.

To open the Big Joe bean bag zipper, start by finding the small black tab on the bottom of the bean bag. The tab has a hole in it, and that’s where the zipper pull is located. Grab onto the pull and slowly zip open the bean bag.

Once it’s open, you can add or remove filling as needed. Then just zip it back up and enjoy your cozy bean bag!

Big Joe Customer Service

Big Joe is a company that provides excellent customer service. They are always available to help their customers with any problems they may have. They are also very friendly and helpful.

I would definitely recommend them to anyone who needs help with anything.

How to Open Big Joe Bean Bag Double Zipper

Hey there! If you’re here, chances are you’re looking for some instructions on how to open up your Big Joe bean bag. Well, never fear, because we’ve got you covered!

Here’s a step by step guide on how to get into your chair without any fuss: 1. First things first, locate the double zipper that runs along the seam of your bean bag. This is usually located at the bottom of the chair.

2. Once you’ve found the zipper, go ahead and grab hold of both sides and give them a good tug until they start to separate. 3. Once the two sides of the zipper are pulled apart slightly, it should be easy to then pull them all the way open. And that’s it!

Now just fluff up your bean bag and enjoy!

How to Refill Big Joe Bean Bag Chair

Looking to save a little money by refilling your Big Joe bean bag chair yourself? Here’s a step-by-step guide on how to do just that! What You’ll Need:

-Big Joe bean bag chair -Scissors -Vacuum cleaner with hose attachment

-2 bags of polystyrene beads (available at most craft stores) -Funnel 1. First things first, you’ll want to empty out your bean bag chair.

Cut along the seam of the chair and dump the old beads into a garbage bag. 2. Next, use your vacuum cleaner with the hose attachment to suck up any remaining beads from inside the chair. 3. Now it’s time to add the new beads!

Using a funnel, pour one bag of polystyrene beads into the bean bag chair until it’s about half full. Repeat with the second bag of beads until the chair is full. 4. Finally, sew up the seam of the bean bag chair and voila – you’re done!


If you’ve ever found yourself asking “why is my Big Joe chair flat?,” you’re not alone. It’s a common question, and one that has a few different answers. First, it’s important to understand that chairs can lose their shape for a variety of reasons.

They may be stored improperly, used too often, or simply not made with the best materials. Whatever the reason, there are a few things you can do to try and fix the problem. One option is to try and fluff up the chair by hand.

This may take some time and effort, but it could help restore the chair to its original state. Another option is to use a hairdryer on low heat to try and loosen up the fabric. Finally, if all else fails, you can always contact the company directly for assistance.

John Davis

John Davis is the founder of this site, Livings Cented. In his professional life, he’s a real-estate businessman. Besides that, he’s a hobbyist blogger and research writer. John loves to research the things he deals with in his everyday life and share his findings with people. He created Livings Cented to assist people who want to organize their home with all the modern furniture, electronics, home security, etc. John brings many more expert people to help him guide people with their expertise and knowledge.

Recent Posts