How to Reupholster a Patio Chair Cushion?

Patio chairs are a great way to relax and enjoy the outdoors, but over time the cushions can become worn and faded. If your patio chair cushions are starting to show their age, you don’t have to replace them – you can reupholster them! Reupholstering patio chair cushions is a fairly easy DIY project that anyone can do.

  • Remove the old cushion from the patio chair
  • This will typically involve removing any existing staples or tacks holding it in place
  • Measure the seat of the chair to determine how much fabric you will need to reupholster the cushion
  • Add a few inches to your measurement to allow for seam allowances
  • Cut out your new piece of fabric using the measurements from step 2
  • If you are adding piping or other embellishments to your cushion, do so now before sewing the four sides of the fabric together
  • Sew the four sides of the fabric together, leaving an opening along one side for stuffing
  • Turn your newly sewn cushion cover right side out and stuff with poly-fill until it is plump but not overstuffed
  • 6 Hand stitch or use a machine to close up the opening along one side of the cushion cover

How to Recover Sun Lounger Cushions

Whether your sun lounger cushions are looking a little worse for wear after a long summer of use, or you simply want to change up the look of your outdoor furniture, recovering them is a quick and easy way to do so. Plus, it’s a great opportunity to add some personal style to your space! Here’s how to recover sun lounger cushions in just a few simple steps:

1. Remove the old cushion covers from the foam inserts. If they’re attached with Velcro, this should be easy enough to do. If not, you may need to use a seam ripper or sharp knife to carefully remove the stitching.

2. Measure the foam inserts and cut new fabric accordingly. Add an extra inch or two all around for seam allowance. 3. Pin the fabric in place and sew together using a sewing machine or needle and thread.

Be sure to leave an opening along one side so that you can insert the foam later on. 4. Turn the cover right-side out and insert the foam insert (if necessary). Use stuffing or batting if needed to fill out any empty spaces.

Hand stitch the opening closed.

How to Cover Outdoor Cushions

Assuming you would like a blog post discussing how to cover outdoor cushions: One of the easiest ways to add some life and personality to your patio furniture is by adding some colorful cushions! But if you leave your cushions outside, they can start to look a little worse for wear after awhile.

One way to prolong the life of your outdoor cushions is to make covers for them. That way, when they do start to show signs of wear, you can just take off the covers and wash them (or even sew on new ones!) instead of having to replace the entire cushion. Here’s a quick tutorial on how to make covers for your outdoor cushions:

What You’ll Need: -Outdoor fabric (enough to cover all of your cushions) -Scissors

-Pins -Sewing machine & thread Instructions:

1. Start by measuring your cushion. You’ll want to add an extra inch or two all around so that the cover fits snugly but not too tightly. Cut out your fabric according to these measurements.

2. Pin the fabric together along the sides, then sew it together using a sewing machine. Be sure to use a sturdy thread since this piece will be exposed to the elements. If you don’t have access to a sewing machine, you can also hand-sew this together using a needle and thread.

Just be aware that it will take much longer this way! 3. Once you have sewn all three sides together, turn the cover right side out so that the seam is now on the inside. Slip it over your cushion and voila–you’re done!

Free Sewing Patterns for Outdoor Furniture Cushions

One of the best ways to add personality and style to your outdoor space is with custom made furniture cushions. Not only can you choose the fabric, pattern and color that fits your taste and style, but making them yourself can save you a ton of money. And if you’re not the sewing type, don’t worry – there are plenty of no-sew options out there as well.

To help get you started, we’ve rounded up 10 FREE patterns for outdoor furniture cushions that are sure to add comfort and style to your space. 1. No-Sew Bench Cushion from A Beautiful Mess – This super simple cushion doesn’t require any sewing whatsoever and can be put together in just a few minutes using some heavy duty staples and fabric glue. 2. Piped Bench Cushion from Ana White – If you’re looking for a bit more of a polished look, this bench cushion features clean lines and piped edges.

The construction is pretty straightforward and only requires basic sewing skills. 3. Knife Edge Chaise Lounge Cushions from Martha Stewart – These knife edge chaise lounge cushions have a sleek look that would be perfect for modern outdoor spaces. The construction is fairly simple, but does require some sewing skills.

4. Boxed Corner Chair Cushions from Pretty Handy Girl – These chair cushions feature crisp boxed corners which give them a nice finished look. The tutorial includes step-by-step instructions as well as photos to help guide you through the process.

Recover Patio Cushions Without Sewing

If your patio cushions are looking a little worse for wear, don’t despair! There’s no need to sew new covers when you can easily recover them with just a few supplies. Here’s what you’ll need:

-1 yard of fabric (for each cushion) -Scissors -Stapler and staples

-Ruler or measuring tape -Pins (optional) Start by cutting your fabric to the appropriate size.

You’ll want to leave about 1 inch of seam allowance all the way around. If you’re using patterned fabric, be sure to center the design on the cushion. Once your fabric is cut to size, fold over one long side and staple it in place.

Repeat on the other three sides, making sure that the fabric is pulled taut as you go. Trim any excess fabric from the corners, then flip your cushion over and enjoy!

Replacement Cushions for Outdoor Furniture

If you’re like most people, your outdoor furniture sees a lot of use during the summer months. Barbecues, pool parties, and just relaxing in the backyard can all take their toll on your furniture cushions. Eventually, they’ll start to look a little worn and faded.

When that happens, it’s time to think about replacing them. There are a few things you’ll need to keep in mind when shopping for new cushions. First, you’ll need to know the size of your furniture so you can find cushions that fit properly.

Second, you’ll need to decide on the style of cushion you want. There are many different options available, from solid colors to patterned designs. Third, you’ll need to choose a material that can withstand the elements.

Outdoor furniture cushions are typically made from synthetic fabrics such as polyester or acrylic. Once you’ve found the perfect replacement cushions for your outdoor furniture, it’s time to enjoy your summer!

How Do You Reupholster Outdoor Chair Cushions?

If your outdoor chair cushions are looking a little worse for wear, it might be time to reupholster them. This is a relatively easy process that you can do yourself, and it will give your chairs a whole new lease on life. Here’s how to do it:

1. Remove the old fabric from the cushions. Use a sharp knife or scissors to carefully cut away the fabric, being careful not to damage the underlying foam. 2. Measure the cushion coverings and cut out new pieces of fabric accordingly.

Make sure to add an extra inch or two all around so you have plenty of material to work with. 3. Pin the new fabric in place and then sew it together using a sewing machine or needle and thread. Again, be careful not to damage the foam as you sew.

4. Once the new covers are sewn up, simply slip them over the old foam cushions and voila!

Can You Recover Outdoor Patio Cushions?

Most outdoor patio cushions can be recovered, as long as they are not too badly damaged. To recover your cushions, you will need to remove the old fabric and replace it with new fabric. You may also need to add new stuffing to the cushion if it is significantly flattened.

To remove the old fabric, start by cutting it away from the seams with a sharp knife. Then, use a screwdriver or another sharp tool to remove any staples or tacks that are holding the fabric in place. Once the old fabric is removed, you can begin attaching the new fabric.

Start by stapling or tacking one side of the new fabric in place. Then, stretch the fabric tight and staple or tack down the other side. Finally, trim away any excess fabric and re-stuff the cushion if necessary.

Your patio cushions should now be good as new!

How Do You Recover Patio Cushions Without Sewing?

If your patio cushions have seen better days and you’re thinking of throwing them out, think again! With a little bit of effort, you can easily recover them and give them new life. Here’s how:

First, remove the old fabric from the cushion. You can do this by either cutting it off or carefully pulling it away from the stuffing. If you choose to cut it off, be sure to leave enough fabric so that you can re-sew the new cover on.

Next, measure your cushion and cut out a piece of new fabric that is slightly larger than the old one. This will allow for some wiggle room when you’re sewing everything together. Now it’s time to sew!

Start by pinning the new fabric in place around the edge of the cushion. Then, using a sewing machine or needle and thread, stitch around the entire perimeter. Be sure to backstitch at each corner for extra strength.

Once you’ve sewn all the way around, trim any excess fabric and turn your cushion cover right side out. Slip it over your cushion and voila – brand new patio cushions without having to break out the sewing machine!

How Can I Cover My Outdoor Cushions Cheap?

If you’re looking for ways to cover your outdoor cushions on a budget, there are a few options available to you. One option is to purchase a ready-made slipcover from a retailer such as Target or Pottery Barn. These slipcovers can be found in a variety of colors and patterns, so you’re sure to find one that matches your patio furniture.

Another option is to make your own slipcover using fabric from a local craft store. This option will be more labor-intensive, but it will also allow you to customize the look of your slipcover. Finally, if you have old sheets or blankets that you no longer use, consider repurposing them into cushion covers.

Simply measure the dimensions of your cushions and cut the fabric to size before sewing it into place.


Have a patio chair with a cushion that needs some love? You can easily reupholster it yourself and save money in the process! Here’s how:

1. Remove the old fabric from the cushion, being careful to remove any staples or tacks. 2. Cut new fabric to size, allowing for about an inch of excess all around. 3. Place the new fabric over the cushion, wrong side up.

Pin or staple in place. 4. Turn the cushion right side out and stuff with batting or other filling material. Hand-sew or machine-sew the opening closed.

5. Attach the newly upholstered cushion to your chair and enjoy!

John Davis

John Davis is the founder of this site, Livings Cented. In his professional life, he’s a real-estate businessman. Besides that, he’s a hobbyist blogger and research writer. John loves to research the things he deals with in his everyday life and share his findings with people. He created Livings Cented to assist people who want to organize their home with all the modern furniture, electronics, home security, etc. John brings many more expert people to help him guide people with their expertise and knowledge.

Recent Posts