If you have a piece of furniture that you love but it’s starting to look a little worn, you don’t have to get rid of it. You can give it new life by reupholstering it. This project is not as difficult as it may seem, and it’s a great way to save money instead of buying new furniture.
The first thing you need to do is remove the old fabric from the chair and ottoman. You’ll need to use a sharp knife or scissors to carefully cut away the staples or tacks holding the fabric in place. Once the fabric is removed, you can start measuring and cutting your new fabric.
When cutting the new fabric, be sure to add an extra inch or two all the way around so you have enough to work with. Attach the new fabric using either staples or tacks, being careful to stretch it tight so there are no wrinkles or sags.
- Remove the old fabric from the chair and ottoman
- This can be done by carefully cutting away the staple lines with a utility knife and then pulling the fabric off of the furniture piece
- Clean the chair and ottoman frame to prepare for reupholstering
- Use a vacuum cleaner with a brush attachment to remove any dirt, dust or debris from nooks and crannies
- Wipe down the frame with a damp cloth to remove any remaining residue
- Cut new fabric to size for reupholstering the chair and ottoman
- Add several inches to each measurement to allow for trimming and tucking as you upholster the furniture pieces
- Begin reupholstering the chair by stapling one side of the fabric to the frame, stretching it taut as you go
- Repeat on all sides until the entire chair is covered in new fabric
- Finish by trimming away any excess material
- Reupholster the ottoman following steps similar to those used for the chair, being sure to stretch the fabric taut as you staple it into place
How Much Does It Cost to Have a Chair And Ottoman Reupholstered?
When it comes to reupholstering a chair and ottoman, the costs can vary greatly depending on a number of factors. These include the size of the pieces, the fabric chosen, the level of detail involved in the upholstery work, and more. Generally speaking, you can expect to pay anywhere from $200 to $1,000 or more to have a chair and ottoman professionally reupholstered.
If you’re looking to save some money on the project, one option is to do it yourself. However, this is not a job for beginners – it’s important to have some experience with upholstery before attempting it. Otherwise, you run the risk of damaging your furniture or ending up with an inferior finished product.
Overall, there’s no definitive answer when it comes to how much it costs to have a chair and ottoman reupholstered. It all depends on your specific needs and wants. But by taking into account all of the factors mentioned above, you should be able to get a better idea of what kind of price range you’re looking at.
Can I Reupholster a Chair Myself?
Yes, you can reupholster a chair yourself! The process is relatively simple and only requires a few tools and materials. First, remove the old fabric from the chair using a screwdriver or utility knife.
Next, measure and cut the new fabric to size, allowing for an extra inch or two on all sides. Then, staple the fabric in place on the underside of the chair seat. Finally, reattach any buttons or trim pieces that were removed during disassembly.
How Much Fabric Do I Need to Reupholster a Chair And Ottoman?
When considering how much fabric you need to reupholster a chair and ottoman, there are two main factors: the size of the furniture and the pattern repeat of the fabric.
As a general rule of thumb, you will need approximately one yard of fabric for every foot of furniture. So, for example, if your chair and ottoman are each two feet wide (or one yard wide), you will need four yards of fabric.
However, if your fabric has a large pattern repeat (meaning that the design elements are spaced further apart), you may need more fabric in order to match up the patterns when cutting your pieces. In this case, it is best to err on the side of caution and purchase slightly more fabric than you think you’ll need.
What is the Easiest Way to Reupholster a Chair?
Assuming you have some basic sewing skills, reupholstering a chair is not difficult and can be done in a few hours. You will need to remove the old fabric and padding, measure and cut new fabric, and sew it all back together. Here are the steps in detail:
1. Remove the old fabric and padding. Use a screwdriver to remove any staples or tacks holding the fabric in place. Then, carefully peel away the fabric, being careful not to rip it.
Once the fabric is removed, remove any old padding by pulling it off or cutting it away with scissors.
2. Measure and cut new fabric. Place the old piece of fabric on top of your newfabricand trace around it with a pencil to create a template.
Then add an extra 1-2 inches all the way around for seam allowance. Cut out your new piece of fabric using sharp scissors.
3 .
Sew the new fabrictogether . Start by sewingthe side seams togetherwith a straight stitch . Then do the same for the top and bottom seams .
Finally , sew aroundthe entire edge ofthefabricwith a zigzag stitchto prevent fraying .
4 . Attachnewpadding (optional) .
If you want , you can addnewpaddingbefore attachingthefabricto ��the chair frame . Simplycutapieceofpaddingtothesamedimensionsasthefabricandsewitinplace usinga stapleror glue gun .5 �� Attachthefabrictothechairframe �� Nowit ‘s time togetyourchairreadyforitsmakeover! First , stapleor gluethefabrictothemiddleofthebackrestandworkyourwayoutwardsuntilit ‘s fullyattached .
How to Reupholster a Chair With Arms
Have you ever found an amazing chair at a thrift store, garage sale, or even on the side of the road, but it was missing its arms? Or maybe you have a perfectly good chair with arms that are just too worn out or dated to keep. Either way, reupholstering a chair with arms is not as difficult as it may seem!
Here is a step-by-step guide to help you give new life to your old chairs.
Tools and Materials Needed:
-Screwdriver
-Plyers
-Staple gun and staples
-Fabric (enough to cover the entire chair plus 2 inches all around)
OR Leather/vinyl (enough to cover the front, back, and sides of the chair plus 2 inches all around) *If using leather/vinyl you will also need contact cement*
-Foam padding (optional) *If using foam padding you will also need spray adhesive* -High density foam is best for durability*
Instructions:
1. Remove the old fabric from the chair. Start by removing any staples or tacks holding the fabric in place. If there are any stubborn staples left behind, use the screwdriver and plyers to remove them.
2. Once all of the old fabric has been removed, take a look at the condition of the wood frame and webbing underneath. If necessary, repair or replace any damaged parts before proceeding.
3a.
If using new fabric: Measure and cut your fabric so that it is large enough to wrap around the entire chair plus 2 inches all around. Wrap the fabric around the chair and secure it in place with staples every 4-6 inches along both sides and across the back ofthe seat . Make sure thatthe fabric is pulled tight so that there are no wrinkles or sags . Trim off any excess fabric .
3b.. If using leather/vinyl: Measure and cut your leather/vinyl so that it is large enoughto wrap aroundthefront , back ,and sidesofthechairplus2inchesallaround . Usethecontactcementtosecuretheleather/ vinylinplaceononesideofthechairframe . Wrapitaroundandsecurewithmorecontactcementonthe othersideandacrossbackoftheseat .
How to Cover a Chair With a Throw
If your furniture is looking a little worse for wear, you can easily give it new life by covering it with a throw. This is a great way to add some extra color or pattern to a room, and it’s also a quick and easy way to protect your furniture from wear and tear. Here’s how to do it:
1. Measure your chair and cut your fabric accordingly. You’ll need enough fabric to cover the seat and back of the chair, plus about 6 inches extra on all sides.
2. Fold over the edges of the fabric and pin them in place.
Then, use a sewing machine or needle and thread to hem the edges of the fabric.
3. Place the fabric over the chair and tuck it in around the back and seat. Use straight pins or staples to secure the fabric in place if necessary.
4. That’s it! Your chair is now covered with a beautiful throw that will help protect it from wear and tear.
Reupholster Over Existing Fabric
Have you ever wondered if you could reupholster over existing fabric? The answer is, yes! You can save yourself time and money by simply reupholstering over existing fabric.
Here’s how:
1. Remove the old fabric from the furniture piece. Be sure to remove all staples, tacks, or other fasteners.
2. Clean the surface of the furniture to remove any dirt or debris.
3. Lay out your new fabric on a flat surface and position the furniture piece on top of it. Cut the fabric around the piece, allowing for several inches of excess material on all sides.
4. Apply adhesive to the back of the furniture piece and position it onto the new fabric. Smooth out any wrinkles or bumps in the fabric as you go.
5. Once the piece is positioned correctly, begin stapling or tacking it into place along all four sides.
Start in the middle of each side and work your way out toward the corners. Use as many staples or tacks as necessary to secure the fabric in place.
6 .
Trim away any excess fabric from around the edges of the furniture piece using sharp scissors or a utility knife. Be careful not to cut into either thefabric below or above .
7 .
How to Reupholster a Chair Seat And Back
Assuming you have a chair with an upholstered seat and back that needs reupholstering, the following steps will show you how to do it yourself. You’ll need some basic supplies like a stapler, scissors, and fabric, plus a little bit of patience. The end result will be a refreshed chair that looks brand new.
1. Remove the old fabric from the seat and back of the chair. Use a screwdriver to remove any staples that are holding the fabric in place. If the fabric is glued on, you may be able to peel it off without too much trouble.
2. Cut new pieces of fabric to fit the seat and back of the chair. Make sure to leave enough extra material so that you can wrap it around to the underside of the seat/back and staple it in place.
3. Start by stapling one side of the new fabric in place on the underside of the seat or backrest.
Then pull the fabric taut and staple down the other side. Repeat this process for both sides until the entire piece is secure.
4. Trim away any excess fabric from around the edges, being careful not to cut into your newly upholstered surface.
Conclusion
If you’re looking to add a personal touch to your home décor, reupholstering a chair and ottoman is a great way to do it! The process is relatively simple, and with some time and effort, you can have a uniquely upholstered piece of furniture that will last for years. Here’s how to do it:
1. Remove the old fabric from the chair and ottoman. This can be done by carefully cutting it away with a sharp knife or scissors. Be sure to remove all staples and tacks as well.
2. If the foam padding is in good condition, you can reuse it. If not, replace it with new foam that can be purchased at most fabric stores.
3. Cut your new fabric to size, allowing for about 2 inches of extra material on all sides.
This will give you some wiggle room when attaching the fabric later on.
4. Begin attaching the new fabric starting at the center of one side of the chair or ottoman, working your way outwards towards the corners. Use either staples or upholstery tacks to secure the fabric in place.
Be sure to pull the fabric tight as you go so that there are no wrinkles or sagging areas once finished.
5 When you reach the corners, simply fold them like you would wrapping a present, making nice neat folds until everything is covered snugly . Finish by trimming away any excess fabric .
Voila! You’ve now successfully reupholstered your furniture !