If you’ve ever found yourself with a wet phone charger, you know how frustrating it can be. Water and electricity don’t mix, and a wet charger can cause all sorts of problems. Here’s what you need to do to get water out of your phone charger.
First, unplug the charger from the outlet and from your phone. Then, remove the charging port cover, if your phone has one. If the water is just on the surface of the charger, you can try wiping it off with a dry cloth.
If the water is inside the charger, you’ll need to open it up to dry it out.
- If your phone charger is wet, remove it from the water immediately
- If the charger is plugged into an outlet, unplug it
- Shake the charger to remove any excess water
- Use a blow dryer on the lowest setting to dry the charger
- Be sure not to hold the blow dryer too close to the charger, as this could damage it
- If the charger is still wet, leave it to air dry for 24 hours
How do you get water out of your phone charger part?
It’s happened to the best of us – you’re charging your phone and suddenly water starts dripping out of the charger port. Whether it’s from a spilled drink or condensation from humid weather, water in your charger port can spell disaster for your phone. Luckily, there are a few simple steps you can take to remove the water and get your phone charging again.
First, remove the battery if possible. This will help to prevent any further damage to your phone. If you can’t remove the battery, be sure to power off your phone as soon as possible.
Once the battery is out (or your phone is powered off), take a look at the charging port. If there is a lot of water inside, you may need to use a vacuum cleaner or other suction device to remove it. Be careful not to damage the port in the process.
If there is only a small amount of water, you can try using a can of compressed air to blow it out. Be sure to hold the can upright so that the compressed air doesn’t force any more water into the port.
Once you’ve removed as much water as possible, you can try charging your phone again.
If it still doesn’t work, you may need to take it to a professional to have the charging port repaired or replaced.
In most cases, a little bit of water in your charger port won’t do any lasting damage to your phone.
How do you dry out a phone charger port?
If your phone charger port is wet, there are a few things you can do to dry it out. First, remove the charger from the port and shake any excess water out. Next, use a soft cloth to wipe away any moisture from the port.
If the port is still wet, blow into it or use a can of compressed air to remove any remaining water. Finally, allow the port to air dry for a few hours before attempting to charge your phone again.
If your phone charger port is exposed to water on a regular basis, you may want to consider using a waterproof case or cover to protect it.
Waterproof cases and covers can be found for most phone models and can help to keep your charger port dry and free from corrosion.
Was liquid detected in the Lightning connector? Do this now!
How to get water out of iphone charging port quickly
If your iPhone gets wet, the first thing you should do is turn it off. Then, remove the SIM card and any other external accessories. Next, use a soft, lint-free cloth to wipe down the phone, paying special attention to the charging port.
If there is water in the charging port, the best way to remove it is with a vacuum cleaner. Put the vacuum cleaner on the lowest setting and hold the hose over the charging port. The vacuum will suck out any water that’s in there.
If you don’t have a vacuum cleaner, you can try using a can of compressed air. Just hold the can upside down and spray the charging port for a few seconds. The compressed air will push the water out of the port.
Once you’ve removed the water from the charging port, you can dry it off with a soft, lint-free cloth. Then, put the SIM card and any other external accessories back on the phone. Finally, turn the phone back on and check to see if it’s working properly.
Vibration to get water out of phone charging port
If your phone is charging port is full of water, you can remove the water by using vibration. Vibration will cause the water to move and will eventually come out of the charging port. You can use a vibrating object such as a toothbrush or a vibrating toy to remove the water.
How to get water out of charger port android
If your Android phone gets wet, there’s a good chance that water has gotten into the charging port. If this happens, it’s important to get the water out of the port as soon as possible to prevent damage to your phone. Here’s how to do it:
1. Remove the battery from your phone. This will help to prevent further damage to your phone.
2. Use a vacuum cleaner to suck out any water that may be in the charging port.
3. Use a cotton swab or Q-tip to remove any water that’s still in the port.
4. Allow the port to dry completely before putting the battery back in your phone.
5. If your phone still isn’t working, take it to a professional to have it checked out.
How to get water out of charging port without rice
If your phone has gotten wet, there are a few things you can do to try to salvage it. One popular method is to put the phone in a bag of rice. The rice will absorb the water and hopefully dry out your phone.
However, if your phone has gotten water in the charging port, this method will not work. The rice will not be able to get into the charging port to absorb the water.
So, how do you get water out of the charging port without rice?
There are a few things you can try.
First, try using a can of compressed air. You can buy this at most electronics stores.
Just point the can towards the charging port and give it a few short blasts. The compressed air will hopefully blow the water out of the port.
If that doesn’t work, you can try using a vacuum cleaner.
Again, just make sure the vacuum cleaner is pointing towards the charging port and turn it on. The vacuum will hopefully suck the water out of the port.
If neither of those methods work, you can try using a hairdryer.
Just make sure the hairdryer is on the lowest setting and hold it a few inches away from the charging port. The heat from the hairdryer will hopefully evaporate the water out of the port.
Conclusion
If your phone charger has gotten wet, there are a few things you can do to try and salvage it. First, remove the charger from the water and dry it off as much as possible. If the charger is still wet, you can try using a hairdryer on the low setting to help dry it out.
You can also try using a can of compressed air to blow any water out of the charger. If your charger is still not working, you may need to replace it.
