Brookstone massage chairs are some of the most popular on the market. But like any other type of massage chair, they can have their share of problems. If you’re having trouble with your Brookstone massage chair, here are a few tips on how to fix it.
- Inspect the massage chair for any visible damage
- If there are any ripped or frayed wires, damaged rollers, or other obvious issues, these will need to be repaired before using the chair
- Check that all of the buttons and controls on the chair are working properly
- If any seem to be stuck or not responding correctly, try gently cleaning them with a soft cloth
- Make sure that the power cord is plugged in securely and that the outlet it is plugged into is working properly
- Try moving the massage chair to a different location in the room or house
- Sometimes furniture can block signals from reaching the massage chairs’ sensors, so repositioning it may help fix this issue
- If Brookstone does not have a local service center, you may need to ship your massage chair back to them for repairs
Can a Massage Chair Be Repaired?
Massage chairs are quite delicate and complex machines. As such, it is not advisable to attempt to repair one yourself unless you have experience and knowledge in doing so. It is always best to consult with the manufacturer or a qualified technician when troubleshooting and repairing massage chairs.
That being said, there are some common issues that can be easily fixed without professional help. For instance, if your massage chair is making strange noises, it might just need some lubrication. Or, if the rollers are not working properly, they may need to be reset.
In general, though, most repairs will require the assistance of a professional. So if your massage chair isn’t working correctly, don’t hesitate to reach out for help!
Why is My Massage Chair Not Working?
If you’re wondering why your massage chair isn’t working, there are a few possible reasons. First, check to make sure that the chair is plugged in and that the power switch is turned on. If the chair is still not working, it’s possible that the motor or controller has malfunctioned.
You can try resetting the controller by unplugging it and then plugging it back in. If this doesn’t work, you may need to replace the controller. Another possibility is that a fuse has blown; if this is the case, you’ll need to replace the fuse.
Finally, if none of these solutions work, it’s possible that the massage chair itself needs to be replaced.
How Do You Disassemble a Brookstone Massage Chair?
When it comes to disassembling a Brookstone massage chair, there are a few things you need to keep in mind. First of all, make sure that you have all the right tools. You will need a screwdriver, pliers and possibly a hammer.
Secondly, be very careful not to damage any of the parts as you disassemble them. And lastly, follow the instructions carefully so that you can reassemble the chair properly.
To start, locate all the screws on the outside of the chair.
Remove these screws with your screwdriver. Next, take off the upholstery by carefully pulling it away from the frame of the chair. Be careful not to rip or tear the upholstery as you do this.
Once the upholstery is removed, you should be able to see all of the inner workings of the chair including the motor and massage rollers.
Now begin disconnecting each piece starting with any wires that are attached. Then move on to removing bolts and nuts that hold everything together.
Be sure to keep track of which pieces go where so that you can easily reassemble everything later on. When everything has been disconnected, carefully remove each piece from inside the chair until only the frame remains.
At this point, you can either choose to leave your Brookstone massage chair in pieces or attempt to reassemble it yourself usingthe instructions provided above as a guide .
If you decideto try and put it back together again , we recommend having another person helpyou since someofthe piecescanbe quite heavy .
Where is the Fuse on a Massage Chair?
There are a few different places where the fuse on a massage chair could be located. The first place to check would be on the power cord of the massage chair. There should be a small box near the plug with a fuse inside.
If this is not the case, then check for a small access panel on the back or bottom of the massage chair. Inside of this panel, there should be another small box with a fuse inside.
How to Reset Massage Chair
If you’re like most people, you probably don’t think about resetting your massage chair until something goes wrong. Maybe the chair doesn’t seem to be working as well as it used to, or maybe it’s started making strange noises. Whatever the reason, if you need to reset your massage chair, there are a few things you’ll need to do.
First, unplug the chair from any power source and remove any batteries. Next, locate the reset button on the control panel. This is usually a small red or black button that is clearly marked.
Press and hold the reset button for several seconds until you hear a beep or see a light indicate that the chair has been reset.
Once the chair has been successfullyreset, you can plug it back in and turn it on. You may need to readjust some of the settings, but otherwise your massage chair should be good as new!
How to Fix Massage Chair Remote
If your massage chair remote is not working, there are a few things you can try to fix it. First, check the batteries. If they are low or dead, replace them with fresh batteries.
Next, check the connections between the remote and the massage chair. Make sure that all of the wires are securely connected. Finally, if none of these solutions work, you may need to purchase a new remote.
How to Repair Massage Chair
If you have a massage chair that needs repair, you’re in luck. There are many places that offer massage chair repair services.
When choosing a place to take your massage chair for repair, be sure to ask about their experience and expertise.
You’ll want to make sure they know what they’re doing and can fix your particular model of massage chair.
Once you’ve found a reputable place for massage chair repairs, be sure to ask about their warranty policy. Most places will offer some kind of warranty on their workmanship.
This is important in case something goes wrong with the repairs or if the problem persists after the repairs are made.
Finally, be sure to ask about the cost of the repairs before taking your massage chair in for service. While most places charge reasonable rates, there are always going to be some that charge more than others.
Be sure to get an estimate beforehand so you know what to expect.
Brookstone Massage Chair Remote
If you’re looking for a massage chair that comes with a remote, then the Brookstone Massage Chair is a great option. This chair features a variety of massage settings and programs that can be controlled via the included remote. You can choose from a full body massage, neck and shoulder massage, or lower back massage.
The chair also has heat therapy built in, which can be turned on or off with the push of a button.
Conclusion
If your Brookstone massage chair isn’t working properly, there are a few things you can do to fix it. First, check the power cord to make sure it’s plugged in correctly. Next, check the batteries to see if they need to be replaced.
If neither of these solutions work, you may need to contact customer service for further assistance.
