If you have a platform bed, you may be wondering how to cover box spring. There are a few different ways that you can do this, and the method that you choose will depend on the look that you are going for. Here are a few different ways to cover box spring on platform beds.
- Remove the mattress from the bed
- Unfold the fabric so that it is flat
- Place the fabric over the box spring, making sure to smooth out any wrinkles
- Replace the mattress on top of the box spring
- Trim the excess fabric from the sides, using scissors
- Tuck the fabric under the mattress at the sides and ends
How do I cover my box spring?
If you’re looking to give your bedroom a quick makeover, one of the easiest things you can do is cover your box spring. Box springs are often an eyesore, and they can be tough to match with the rest of your bedding. Luckily, there are a few easy ways to cover your box spring so it blends in with the rest of the room.
One of the simplest ways to cover your box spring is with a bed skirt. Bed skirts come in a variety of colors and fabrics, so you can easily find one to match your bedding. If you have a patterned comforter, you can even find a bed skirt with a similar pattern.
Just drape the bed skirt over the box spring and tuck it into place. If you want something a little more substantial, you can opt for a box spring cover. Box spring covers come in a variety of materials, from quilted fabric to wood.
They’re also available in a variety of colors, so you can easily find one to match your bedding. Just slip the cover over the box spring and secure it in place.
Is it OK to put a box spring on a platform bed?
Most platform beds don’t require a box spring, but there are a few exceptions. If your platform bed has a metal frame, then you might need a box spring to help distribute the weight evenly and prevent the mattress from sagging. If your platform bed has a wood frame, then you probably won’t need a box spring.
However, if you have a mattress that’s particularly heavy or thick, then you might want to use a box spring to help support it. Ultimately, it’s up to you whether or not you use a box spring on a platform bed. If you’re not sure, then it’s always best to consult with the manufacturer or a mattress expert.
How do you cover the bottom of a box spring?
Most box springs come with a fabric cover already attached. If yours does not, or if you want to replace the cover, you can do so relatively easily. You will need to purchase a fabric cover that is slightly larger than your box spring, as well as some elastic or Velcro strips.
To attach the cover, simply stretch it over the box spring and secure it in place with the elastic or Velcro. Make sure the cover is tight so that it doesn’t sag or bunch up. Once the cover is in place, you can put your mattress on top and make up the bed as usual.
Do you put a cover on a box spring?
No, you do not need to put a cover on a box spring. Box springs are typically covered with a dust ruffle or bed skirt, which helps to keep the spring clean and free of dust and dirt. If you have a box spring that is exposed, you may want to consider covering it with a sheet or blanket to help keep it clean.
Master Bedroom Routine || Concealing my box spring mattress || New Pillows and New Vase
How to cover box spring without bed skirt
If you’re looking to add a bit of flair to your bedroom without spending a lot of money, one easy way to do so is to cover your box spring without using a bed skirt. Here’s how:
First, measure the height of your box spring from the floor to the top.
Next, measure the width and length of your box spring. Once you have those measurements, add 2-3 inches to each measurement to allow for wiggle room. Now that you have your measurements, it’s time to find fabric that you like.
You can either use a bed skirt that you already have or purchase new fabric. If you’re using new fabric, make sure to pre-wash it before you begin. Once you have your fabric, cut it to the size of your box spring plus the 2-3 inches that you added to the measurements.
Next, fold over the top edge of the fabric and iron it down. Then, fold over the bottom edge of the fabric and iron it down. Now it’s time to attach the fabric to the box spring.
You can do this by using safety pins or by sewing the fabric to the box spring.
How to cover box spring and metal frame
If you have a box spring and metal frame that you need to cover, there are a few things that you need to do in order to make sure that the process goes smoothly. Here are the steps that you need to take:
1. Measure the box spring and metal frame.
This will give you an idea of how much fabric you need to cover the entire piece. 2. Cut the fabric to the appropriate size. Make sure that you leave enough fabric to wrap around the entire frame and tuck it in.
3. Start at the top of the frame and begin draping the fabric over it. Make sure that the fabric is tight so that it doesn’t sag in the middle. 4. Once you reach the bottom of the frame, tuck the fabric in so that it is snug against the frame.
5. Repeat steps 3 and 4 for the other side of the frame. 6. Finally, tuck the fabric in at the bottom of the frame so that it is completely covered. That’s it!
You’ve now successfully covered your box spring and metal frame.
Box spring cover
If you have a box spring that’s in need of a little TLC, a box spring cover is a great way to give it a fresh, new look. A box spring cover can also help protect your box spring from wear and tear, and keep it clean. Here’s what you need to know about choosing and using a box spring cover.
When shopping for a box spring cover, you’ll want to make sure it’s the right size for your box spring. Box springs come in all different sizes, so it’s important to measure yours before you buy a cover. Once you’ve found a cover that’s the right size, you’ll also want to make sure it’s easy to put on and take off.
Some covers have zippers, while others simply slip on and off. Once you’ve got your box spring cover, it’s time to put it to use. If you’re using it to protect your box spring, be sure to put it on before you put any sheets or blankets on your bed.
This will help keep your box spring clean and free of any wear and tear.
Box spring cover full
If you have a box spring that you need to cover, there are a few different ways that you can go about it. One option is to simply purchase a box spring cover. These covers come in a variety of different materials, so you can choose one that best suits your needs.
Another option is to make your own box spring cover. This can be a great way to save money, as well as get a custom look for your box spring. If you decide to make your own box spring cover, there are a few things that you will need to keep in mind.
First, you need to make sure that the cover is large enough to fit over the entire box spring. Second, you will need to choose a material that is durable and will be able to withstand a lot of wear and tear. Third, you will need to make sure that the cover is easy to put on and take off.
Once you have all of the necessary materials, you can begin to make your own box spring cover. Start by measuring the length and width of your box spring. Then, cut a piece of fabric that is slightly larger than the box spring.
Next, fold the fabric in half and sew the two sides together.
If you have a platform bed, you may be wondering how to cover the box spring. There are a few different ways that you can do this, and it really depends on your personal preference. You can either use a fitted sheet, a dust ruffle, or even a piece of fabric to cover the box spring.
If you use a fitted sheet, simply put it over the box spring and tuck it in. You may need to use a safety pin to keep it in place. A dust ruffle is a great way to cover the box spring and add a bit of decoration to the bed.
You can find dust ruffles at most bedding stores. If you want to get a little more creative, you can use a piece of fabric to cover the box spring. Simply measure the size of the box spring and cut a piece of fabric to fit.
You can then use a hot glue gun to attach the fabric to the box spring. Whatever method you choose, covering the box spring is a great way to add a bit of style to your platform bed.