How Reupholster a Wingback Chair?

Have you ever found an old wingback chair at a garage sale or thrift store and wish you knew how to reupholster it? I’m here to tell you that it’s not as difficult as you may think! With a little time and patience, you can give new life to an old piece of furniture.

If your wingback chair is looking a little worse for wear, you may be thinking about reupholstering it. This can be a great way to give new life to an old piece of furniture, and it can be a fun project to take on yourself. Here are a few tips on how to reupholster a wingback chair:

1. Remove the old fabric. This is the first and most important step. You’ll need to remove all of the old fabric, including any staples or tacks that are holding it in place.

Be careful not to damage the wood underneath as you remove the fabric. 2. Choose your new fabric. Once the old fabric is removed, you can start planning what kind of newfabric you want to use.

Keep in mind that different fabrics will require different amounts of yardage, so make sure to measure your chair before making your purchase. 3. Cut and staple the new fabric into place. Start by cutting your fabric into pieces that will fit over each section of the chair (front, back, sides).

Then, using a heavy-duty stapler, attach the fabric pieces to the chair frame. Make sure everything is nice and tight so that there are no wrinkles or gaps in the upholstery job. 4 .

Add any final touches . Once all of the new fabric is in place , y ou m ight want t o add some decorative touches like tufting or piping . T hese steps are entirely optional , but they c an help give y our finished product a professional look .

How to Reupholster a Wingback Chair! PART 1: Tearing Down the Chair – Thrift Diving

How Much Fabric Do You Need to Reupholster a Wingback Chair?

When it comes to reupholstering a wingback chair, the amount of fabric you’ll need will depend on the size of the chair, as well as the type of fabric you’re using. For example, if you’re using a lightweight fabric like cotton, you’ll need less than if you’re using a heavier fabric like wool. Generally speaking, you’ll need about 3 yards of 54-inch wide fabric for a standard sized wingback chair.

If your chair is larger or if you want to use a patterned fabric, you may need more. It’s always best to err on the side of caution and buy more fabric than you think you’ll need, just in case. To determine how much fabric you’ll need for your particular project, measure the width and height of your wingback chair.

Then add 1 inch to each measurement to allow for seams and hems. For example, if your chair is 30 inches wide and 36 inches tall, you’ll need 31 inches by 37 inches offabric. Once you have your measurements, multiply the width by the height to get the total number of square inches.

Then divide that number by 54 (the number of inches in a yard) to find out how many yards of 54-inch wide fabricyou’ll need. In our example above, we would need 31 x 37 = 1,137 squareinches. 1,137 divided by 54 equals 21 yardsof54-inch widefabric.

How Much Does It Cost to Cover a Wing Back Chair?

Assuming you would like to know the cost of upholstering a wing back chair, there are a few things that will affect the price. The first is the fabric choice. A high-end designer fabric will obviously be more expensive than a basic cotton or polyester.

The second is the labor involved. If you have a very detailed and intricate chair, it will take more time to upholster and thus be more expensive. Finally, the type of filling you choose for your chair will also affect the price.

A down-filled cushion will be more expensive than one filled with polyester fiberfill. So, how much does it really cost to reupholster a wing back chair? It really depends on all of the factors mentioned above.

However, you can expect to pay anywhere from $300 to $1000 for professional upholstery services.

Can I Reupholster a Chair Myself?

Sure, you can reupholster a chair yourself! It’s not terribly difficult, but there are a few things you need to know before you get started. First, you’ll need to remove the old upholstery.

This can be done with a screwdriver and some patience. Once the old upholstery is off, you’ll need to measure the seat and back of the chair to determine how much new fabric you’ll need. Then, it’s simply a matter of stapling the new fabric in place.

Start with the seat, then move on to the back and sides. When you’re all finished, stand back and admire your handiwork!

What is the Easiest Way to Reupholster a Chair?

If you’re looking to give your chairs a fresh new look, reupholstering them is a great option. And while it might seem like a daunting task, it’s actually quite easy to do yourself. All you need is some basic sewing skills and a little patience.

Here’s a step-by-step guide to reupholstering a chair: 1. Remove the old fabric from the chair. Start by removing any staples or tacks that are holding the fabric in place.

Then, carefully peel the fabric away from the chair, being careful not to tear it. 2. Cut out the new fabric pieces. Using the old fabric as a template, cut out two identical pieces of new fabric.

Make sure to add an extra inch or two all around for seam allowance. 3. Attach the new fabric to the chair frame. Start by stapling one of the pieces of new fabric into place on one side of the chair frame.

Then, pull the other piece of fabric over and staple it into place on the other side (overlapping at least an inch in the middle). Be sure to pull the fabric tight as you staple so that there are no wrinkles or sags when you’re finished.

How to Reupholster an Armchair With Wooden Arms

Are you looking to add a fresh, new look to an old armchair with wooden arms? Reupholstering is a great way to give new life to a piece of furniture, and it’s not as difficult as you might think! Here are some tips on how to reupholster an armchair with wooden arms:

1. Remove the old fabric. This is the most time-consuming part of the process, but it’s important to do a thorough job so that your new fabric will have a clean surface to adhere to. Use a screwdriver or other sharp object to loosen and remove any staples holding the fabric in place.

Then, carefully peel away the fabric, taking care not to rip or damage the wood beneath. 2. Prep the wood. Once the old fabric is removed, you’ll need to sand down the wood so that your new fabric will have something smooth to adhere to.

If there are any rough spots or splinters, be sure to sand them down as well. Once you’re finished sanding, wipe away any dust with a damp cloth. 3. Choose your new fabric.

This is where you can really get creative! There are endless possibilities when it comes to choosing new upholstery for your armchair. Consider patterns, colors, and textures that will compliment the rest of your décor and make a bold statement in your space.

4 . Attach the new fabric . Begin by stapling one end of your fabric into place on the underside of one of the armrests .

Then , stretch tautly across t he seat and staple into place on th e other side . Repeat this process for th e backrest , being sure t o pull th e fabr ic t ight ly b ehind th e ar mres ts before stapling into place . Finally , trim away any excess f abric before moving on t o step 5 .

How to Reupholster a Chair Without Removing Old Fabric

Are you looking to reupholster a chair without removing old fabric? If so, this blog post is for you! Here are detailed instructions on how to do just that:

1. Start by assessing the condition of the existing fabric. If it is in good condition and simply needs a refresh, you can proceed with step 2. However, if the fabric is damaged or worn, it will need to be removed before proceeding. 2. Measure the dimensions of the seat and back of the chair.

Cut new pieces of fabric to these dimensions, allowing for an extra inch or two on all sides for seam allowance. 3. Place the new fabric over the existing fabric and use a staple gun to secure it in place around the perimeter of the seat and back. Be sure to pull the fabric taut as you staple so that there are no wrinkles or sagging areas.

4. Once all of the new fabric is in place, trim away any excess material and enjoy your newly upholstered chair!

How to Reupholster a Wingback Chair Video

If you have a wingback chair that is in need of a new look, reupholstering it is a great option. You can do this yourself with some basic tools and supplies, or you can hire a professional to do the job for you. Either way, the process is relatively easy and the results will be well worth it.

To start, you’ll need to remove the old fabric from the chair. This can be done by carefully cutting it away with a sharp knife or scissors. Once the old fabric is removed, take a close look at the chair frame to see if there are any areas that need to be repaired or replaced.

If so, make any necessary repairs before proceeding. Next, you’ll need to measure the dimensions of your chair and cut out new fabric accordingly. When cutting out the new fabric, be sure to add an extra inch or two all around so that you have plenty of room to work with during the upholstery process.

Once your new fabric is cut out, begin attaching it to the chair frame using staples or upholstery tacks. Start at one end and work your way around until all of the fabric is attached securely. When you’re finished stapling or tacking down the fabric, trim away any excess material so that everything looks neat and tidy.

Finally, add any finishing touches like buttons or piping if desired, then sit back and enjoy your newly upholstered wingback chair!


This blog post shows readers how to reupholster a wingback chair. The author first explains what tools and materials are needed for the project. Next, they walk readers through each step of the process, from removing the old fabric to attaching the new fabric.

They include detailed instructions and photos to make the process as easy to follow as possible. Finally, they share a few tips on how to choose the right fabric for your chair and how to avoid common mistakes.

John Davis

John Davis is the founder of this site, Livings Cented. In his professional life, he’s a real-estate businessman. Besides that, he’s a hobbyist blogger and research writer. John loves to research the things he deals with in his everyday life and share his findings with people. He created Livings Cented to assist people who want to organize their home with all the modern furniture, electronics, home security, etc. John brings many more expert people to help him guide people with their expertise and knowledge.

Recent Posts