How Much Fabric to Reupholster a Wing Back Chair?

When deciding how much fabric to reupholster a wing back chair, it is important to take into account the size of the chair, as well as the pattern and style of the fabric. A general rule of thumb is that you will need about two yards of fabric for a standard sized chair. However, if the chair is larger or the fabric has a busy pattern, you may need more fabric.

It is always better to err on the side of too much rather than too little when reupholstering a piece of furniture. In addition to measuring the size of your wing back chair, you will also need to take into consideration the type of fabric you plan to use. If you are using a light-weight fabric, such as cotton or linen, you may be able to get away with using less than two yards.

However, if you are using a heavier weight fabric, such as velvet or leather, you will likely need closer to three yards in order to have enough material to work with.

When it comes to reupholstering a wing back chair, there is no definitive answer as to how much fabric you will need. The amount of fabric you’ll need will depend on the size and shape of your chair, as well as the type of fabric you’re using. If you’re using a light-weight fabric, such as cotton or linen, you’ll likely need between 3 and 4 yards of fabric.

If you’re using a heavier-weight fabric, such as velvet or leather, you may need 5 or 6 yards. To be safe, it’s always best to err on the side of too much rather than too little. That way, if you make a mistake or have any unforeseen issues, you won’t be left scrambling for more fabric.

How Many Meters of Fabric Do I Need for a Wing Chair?

A wing chair is a type of armchair that has wings protruding from the top of the backrest. They were originally designed to trap heat in a room, but today they are more commonly used as an accent piece or occasional chair. So how much fabric do you need to recover a wing chair?

The average wing chair is about 3 meters (9 feet) wide and 1.5 meters (5 feet) deep. To calculate the amount of fabric you need, you first need to determine how much fabric will be needed to cover the seat, back and sides of the chair. For the seat, you will need enough fabric to cover the width and depth of the seat, plus an additional 30 cm (12 inches) for tucking and pleating.

For the back, you will need enough fabric to cover the width and height of the backrest, plus an additional 30 cm (12 inches) for tucking. And for each side panel, you will need enough fabric to cover the width and height of the panel, plus an additional 15 cm (6 inches) for hems. So in total, you will need about 9 meters (30 feet) of fabric to recovering a wing chair.

Is It Hard to Reupholster a Wingback Chair?

It is not hard to reupholster a wingback chair, but it does require some time and effort. The first step is to remove the old fabric from the chair. This can be done by either taking the chair apart or by carefully cutting the fabric away.

Once the old fabric is removed, you will need to measure the new fabric and cut it to size. Next, you will need to attach the new fabric to the chair frame. This can be done with staples, tacks or upholstery nails.

Finally, you will need to reattach any trim or embellishments that were on the original chair.

How Do You Reupholster a Wing Back Armchair?

If you have a wing back armchair that is in need of new upholstery, you may be wondering how to go about reupholstering it. This can be a daunting task, but with some patience and attention to detail, it can be done relatively easily. Here are the steps you’ll need to take:

1. Remove the old fabric – First, you’ll need to remove all of the old fabric from your chair. This includes the main body fabric as well as any trim or piping. Use a sharp utility knife to carefully cut away the fabric, being careful not to damage the underlying wood or padding.

2. Prep the frame – Once all of the old fabric has been removed, give the frame a good inspection. Make sure there are no loose nails or screws, and that all of the joints are tight. If necessary, make any repairs before proceeding.

3. Choose your new fabric – Now it’s time to select the new fabric for your chair. Consider both style and durability when making your choice. You’ll also want to make sure that you have enough fabric to complete the project – typically, you’ll need about 5 yards for a wing back armchair.

4 . Cut and attach your new fabric – With your new fabric chosen, cut it into pieces that will fit over each section of your chair’s frame (front, back, sides). Start by stapling or tacking thefabric in place on one side before moving on to stretch it tight and staple or tack it down onthe other side .

Repeat this process for each section untilthe entire chair is covered . Finally , use a handheld sewing machine toprofessionally finish offthe seams (if desired) .

How Much Does It Cost to Cover a Wing Back Chair?

Wing back chairs can be a bit pricey to cover, depending on the size and style of the chair. The average cost to have a wing back chair reupholstered is between $600 and $1,200, with most people spending around $800. The cost of the fabric will also play a role in how much it costs to cover a wing back chair, with prices ranging from $30 to $100 per yard.

How Much Fabric to Cover an Armchair

When it comes to upholstering an armchair, the amount of fabric you need will depend on a few factors. First, you’ll need to determine the width and height of your chair. Next, you’ll need to decide how much fabric you want to wrap around the sides and back of the chair.

Finally, you’ll need to take into account the pattern repeat of your chosen fabric. Assuming your armchair is 27″ wide and 32″ tall, you’ll need about 3 yards of 54″ wide fabric if you’re planning on wrapping it around all sides of the chair with no seams. If you want to add piping or welting, plan on adding an extra half yard or so.

And finally, if your fabric has a large pattern repeat (such as stripes or florals), be sure to allow for that in your calculations as well. In short, there’s no one-size-fits-all answer when it comes to how much fabric you need to cover an armchair. But by taking some time to measure your furniture and consider your desired look, you can ensure that you end up with just the right amount of material for your project!

How Much Does It Cost to Reupholster a Wingback Chair

If you have a wingback chair that is in need of a little love, you might be wondering how much it will cost to reupholster it. The answer really depends on a few factors, including the size of the chair, the fabric you choose, and the complexity of the job. To give you a general idea, small chairs can start as low as $200 to reupholster, while large chairs or those with intricate details can cost upwards of $1000.

For most people though, you can expect to pay somewhere in the range of $400-$700 to have your wingback chair looking like new again. When choosing your fabric, keep in mind that natural fibers like wool or linen will typically be more expensive than synthetic options. However, they will also last longer and look nicer over time.

If cost is a major consideration for you, there are some great synthetic fabrics out there that can give you a similar look for less money. Once you’ve selected your fabric and budgeted for the project, it’s time to find someone to do the work! If you’re handy with a needle and thread (or know someone who is), then this might be a project you can tackle yourself.

Otherwise, look for an upholstery shop or professional furniture restoration company in your area. Be sure to get multiple quotes before making your final decision – sometimes big differences in price can indicate subpar workmanship. Reupholstering your wingback chair doesn’t have to break the bank – with careful planning and some smart shopping around, you can end up with a beautiful piece of furniture that will last for years to come!

Fabric for Wing Back Chairs

If you’re looking for the perfect fabric to reupholster your wing back chairs, you’ve come to the right place! There are a few things you’ll want to keep in mind when selecting fabric for your wingbacks. First, think about the overall style of the room where the chairs will be placed.

You’ll want to choose a fabric that compliments the existing decor. Secondly, keep in mind how often the chairs will be used. If they’re going to be used on a daily basis, you’ll want to choose a durable fabric that can withstand regular wear and tear.

And finally, take into account your personal style preferences. Do you prefer bold prints or classic solids? With so many fabrics to choose from, it’s easy to find one that’s perfect for your needs!

How Much Fabric to Reupholster a Tub Chair

When you’re ready to reupholster a tub chair, the first thing you need to do is figure out how much fabric you’ll need. The amount of fabric you’ll need depends on the size of the chair, as well as the style. If you’re not sure how much fabric to buy, it’s always better to err on the side of too much rather than too little.

To start, measure the height and width of your chair. Then, add six inches to each measurement. This will give you enough fabric to wrap around the edges of the chair and staple in place.

Next, decide what kind of pattern or design you want for your new upholstery. If you’re going for a solid color, one yard of 54-inch wide fabric should be plenty. But if you want a patterned look, or if your chairs are larger than average, you may need two yards or more.

Once you have your fabric, it’s time to get started reupholstering!


A wing back chair is a stately piece of furniture that can add elegance to any room. But if your wing back chair is looking a bit worse for wear, you may be considering reupholstering it. The first step in any reupholstering project is to determine how much fabric you will need.

To do this, you will need to take some measurements of the chair. First, measure the height of the back of the chair from the top of the seat to the top of the backrest. Next, measure the width of the seat and multiply it by two.

Finally, measure the circumference of the arms and add it to the other two measurements. This will give you the total amount of fabric needed to cover the chair. Now that you know how much fabric you need, you can start shopping for new upholstery!

John Davis

John Davis is the founder of this site, Livings Cented. In his professional life, he’s a real-estate businessman. Besides that, he’s a hobbyist blogger and research writer. John loves to research the things he deals with in his everyday life and share his findings with people. He created Livings Cented to assist people who want to organize their home with all the modern furniture, electronics, home security, etc. John brings many more expert people to help him guide people with their expertise and knowledge.

Recent Posts