It is not difficult to move a toilet in a bathroom. In most cases, the only tools required are a wrench and a screwdriver. The first step is to turn off the water supply to the toilet.
This is usually done by turning the knob on the back of the toilet clockwise until it stops. Next, flush the toilet to empty the tank. Then, use a wrench to loosen the nuts that secure the tank to the bowl.
Once these nuts are loose, you can lift off the tank and set it aside. Next, use a screwdriver to remove the bolts that secure the bowl to the floor. With these bolts removed, you should be able to lift up and remove the bowl from its location.
Finally, reverse these steps to install your new toilet in its desired location!
If you’re planning on renovating your bathroom, one of the first things you’ll need to do is figure out how to move your toilet. Luckily, this is a relatively easy task that anyone can do with a little bit of patience and the right tools.
The first thing you’ll need to do is turn off the water supply to your toilet.
Next, flush the toilet to empty out the tank. Then, use a putty knife to loosen the bolts that hold down the toilet bowl. Carefully lift up the bowl and set it aside.
Now, take a look at the floor around your toilet flange. If there’s any damage or debris, now’s the time to fix it so that your new toilet will have a solid foundation. Once everything looks good, use a hacksaw to cut through the bolts that attaching your old flange to the floor.
With your old flange removed, it’s time to install your new one. First, make sure that it’s level with the surrounding flooring. Then, use screws or bolts to attach it securely in place.
Finally, reattach your toilet bowl and turn on the water supply so you can test it out!
How Easy is It to Move a Toilet in a Bathroom
Moving a toilet is not as easy as one might think. There are many things to consider before attempting to move a toilet, such as the type of flooring, the size of the bathroom, and whether or not there is a sewage pipe in the way. If you have never moved a toilet before, it is best to hire a professional plumber to do the job for you.
What are Some Things to Keep in Mind When Moving a Toilet
Assuming you would like tips for successfully moving a toilet:
1. Turn off the water supply to the toilet by turning the knob located behind it clockwise until it stops. This will prevent any water from accidentally spilling out when you move the toilet.
2. Flush the toilet to empty the bowl of water. Use a plunger if necessary to get rid of any remaining water in the bowl.
3. Disconnect the hoses leading from the back of the toilet tank to the wall or floor (these are typically white or blue).
Some toilets may have a plastic cover over these hoses which can be pried off with a screwdriver or utility knife.
4. Unscrew and remove the bolts holding down your toilet at its base (there should be two). You may need a wrench or socket set for this step depending on what kind of bolts were originally used.
Carefully lift up and remove your toilet from its location being careful not to scratch or break anything in the process!
5A. If you’re just moving your toilet a few inches, then you can probably place it directly on top of some old towels or cardboard boxes which will help protect your floors from scratches/damage caused by shifting during transport.
5B. If you’re moving your toilet across town, it’s probably best to drain all remaining water from both The tank and bowl by following steps 1-4 and then flipping your toilet upside-down so that nothing spills out during transit! Wrap It well in bubble wrap or blankets before placing It In Its new location so that It doesn’t slide around and damage anything en route!
How Do I Know If My Bathroom is Big Enough for a New Toilet
It is important to make sure that your bathroom is big enough for a new toilet before purchasing one. There are a few things you can do to determine this.
First, measure the space where you want to put the toilet.
You will need at least 18 inches of clearance in front of the toilet and at least 24 inches from the center of the toilet to the nearest wall or other obstacle.
Next, consider how much space you have around the existing fixtures in your bathroom. If you have a lot of space, then you likely have room for a new toilet.
However, if your bathroom is cramped, then you may not have enough room for a new toilet.
Another thing to keep in mind is whether or not you have an overhang on your bathroom door. An overhang can reduce the amount of space available in your bathroom, so take this into account when measuring for a new toilet.
Lastly, think about how often you use your bathroom and how many people use it at once. If multiple people use your bathroom at the same time or if you use it frequently throughout the day, then you may want to consider getting a larger toilet so that there is less crowding and more comfort.
Can I Put a Toilet Anywhere in My Bathroom
You can put a toilet almost anywhere in your bathroom, as long as there is access to a water supply and a drain. The ideal location for a toilet is close to the door, so that guests don’t have to traipse through your bathroom to use it. However, if you have a small bathroom, you may need to put the toilet in another location, such as in the corner or against a wall.
If you have a large bathroom, you may be able to put the toilet in the center of the room. Whichever location you choose, make sure there is enough space around the toilet for people to move comfortably.
How Do I Properly Measure for a New Toilet
When you are shopping for a new toilet, it is important to make sure that you choose one that will fit in the space that you have available. The last thing you want is to end up with a toilet that is too big or too small for the space. To avoid this, you will need to take some measurements before you start shopping.
First, measure the rough-in size. This is the distance from the wall behind the toilet to the center of the drain pipe. Most toilets have a standard rough-in size of 12 inches, but it is always best to double check just to be sure.
Next, measure the width and depth of the space where the toilet will be installed. Keep in mind that most toilets protrude out from the wall about 6 inches, so make sure there is enough room for this in your measurement. Once you have these two measurements, you can start looking at toilets!
When comparing toilets, pay attention to both the bowl and tank sizes. You want to make sure that both of these will fit comfortably in the space you have available. Additionally, keep in mind that some toilets come with an extended bowl which adds extra length – something else to consider when making your final decision.
How To Relocate Toilet & Plumbing Pt 1
Moving a Toilet a Few Feet
If you need to move your toilet a few feet, there’s no need to call a professional. With a little elbow grease (and maybe some help from a friend), you can easily do it yourself. Here’s what you’ll need to do:
1. Turn off the water supply to your toilet by shutting off the valve behind it. Then flush the toilet to empty the tank and bowl.
2. Disconnect the water supply line from the back of the toilet using an adjustable wrench.
3. Unscrew the bolts that secure the toilet to the floor using a socket wrench or screwdriver (depending on what type of bolts you have). You may need to remove a plastic cap in order to access the bolts.
4. Lift up on the toilet and carefully walk it over to its new location.
Try not to jostle it too much, as this could crack the porcelain bowl or damage other parts of the toilet.
5. reconnectthe water supply line and turn onthe water supply valve . Flushthe toiletto check for leaks .
If everything looks good, then screw in thte boltssecuring tehtoilet tto thtefloor .
Can You Move a Toilet on a Concrete Slab
If you need to move a toilet on a concrete slab, it is possible to do so without too much difficulty. First, you will need to turn off the water supply to the toilet and flush all of the water out of the bowl. Then, using a plunger, clear any remaining water from the drainpipe.
Next, disconnect the supply line from the wall and remove the two bolts that hold the toilet bowl to the floor. Carefully lift the toilet bowl and set it aside in a safe place. Finally, use a pry bar or crowbar to loosen the wax ring around the drainpipe and pull it out of its hole in the floor.
You may now move your toilet to its new location and reinstall it following these same steps in reverse order.
Can You Move a Toilet to a Shower Drain
If you’re considering moving your toilet to a shower drain, there are a few things you need to know. For starters, you’ll need to make sure the new location is properly vented so that sewage gases don’t build up and cause problems. You’ll also need to account for the extra weight of the toilet when choosing a new spot – the last thing you want is for your toilet to come crashing down in the middle of your shower!
There are a few different ways to vent a toilet, so it’s important to consult with a professional before making any changes. Once you have everything sorted out, however, moving your toilet can be a great way to open up space in your bathroom.
How Far Can You Move a Toilet from the Stack
If you’re planning on moving a toilet in your home, there are a few things to keep in mind. First, the maximum distance that a toilet can be moved from the stack (the main drain pipe) is 3 feet. This means that if you’re planning on moving the toilet more than 3 feet from its current location, you’ll need to extend the stack.
Otherwise, you’ll risk having problems with your plumbing. Additionally, it’s important to make sure that the new location for the toilet is level. If it’s not, you may have issues with flushing or leaks.
Finally, when moving a toilet, be sure to turn off the water supply first and then disconnect all of the pipes before attempting to remove it from its current location.
Conclusion
Moving a toilet is not as difficult as one might think. There are only a few steps involved in the process and it can be done relatively easily with the right tools. The first step is to turn off the water supply to the toilet.
This can be done by shutting off the valve behind the toilet or by turning off the main water supply to the house. Once the water is turned off, flush the toilet to empty out any remaining water in the tank. Next, disconnect the supply line from the back of the toilet using a wrench.
Finally, unscrew the bolts that hold the toilet to floor using a screwdriver or drill. With these final steps complete, lifting up and moving out your old toilet should be easy!
